Grass Valley Forums Facebook   Twitter   YouTube  

Go Back   Grass Valley Forums > Editors > Editing with EDIUS

Reply
 
Thread Tools Display Modes
Old 08-21-2008, 04:46 PM   #1
DMS Video
Senior Member
 
DMS Video's Avatar
 
Join Date: Apr 2008
Location: New York
Posts: 489
Default Basic Audio Question

I finally received my new Edius laptop and have been experimenting and learning the software for a day or so. I do have a basic audio question. When I have a clip that I want to bring down to the timeline I would like to be able to use (see) both channels of audio in stereo (I have two stereo audio channels). I can't figure out how to accomplish this. If I right click on 1A it gives me the option of Stereo Channel 1,2. That seems to be bringing both audio channels to one audio timeline. I would prefer to be able to split the audio so I can manupulate each stereo channel independently. Ideas?

Thanks
David
__________________
David
DMS Films, New York


Laptop - Edius 7.42 / Intel Core i7 4960X Extreme Edition Desktop / 3.6GHz/4.0GHZ / 32GB Hyper-X Quad Channel 1600MHz Ram / Nvidia GeForce GTX-880 w/ 8GB of GDDR5 Video Memory / (3) 1TB SATA-3 V-NAND SSD / Windows 8.1 64-bit
Desktop - Edius 5.5 / Intel i7 975 Quad Core 3.33GHz / 12GB DDR3 1333MHz / Nvidia GeForce GTX-275 / Vis Title 1.1 / FireCoder-Blu / (2) 27" LCDs / JVC DT-V24L1U (24" 1080p) / Windows Vista 64 - www.EditHD.com
DMS Video is offline   Reply With Quote
Old 08-21-2008, 05:11 PM   #2
tony
Senior Member
 
Join Date: May 2007
Location: N.Ireland
Posts: 1,578
Default

Don't know if this helps but if you click on the VOL button until it changes to the PAN rubber band control. This gives you L and R channels.

Tony
tony is offline   Reply With Quote
Old 08-21-2008, 05:16 PM   #3
DMS Video
Senior Member
 
DMS Video's Avatar
 
Join Date: Apr 2008
Location: New York
Posts: 489
Default

Tony,

Thanks for your reply. i tried what you suggested however I'm still only getting audio out of one speaker for each audio channel. I must have a setting incorrect or I'm doing something wrong?

David
DMS
__________________
David
DMS Films, New York


Laptop - Edius 7.42 / Intel Core i7 4960X Extreme Edition Desktop / 3.6GHz/4.0GHZ / 32GB Hyper-X Quad Channel 1600MHz Ram / Nvidia GeForce GTX-880 w/ 8GB of GDDR5 Video Memory / (3) 1TB SATA-3 V-NAND SSD / Windows 8.1 64-bit
Desktop - Edius 5.5 / Intel i7 975 Quad Core 3.33GHz / 12GB DDR3 1333MHz / Nvidia GeForce GTX-275 / Vis Title 1.1 / FireCoder-Blu / (2) 27" LCDs / JVC DT-V24L1U (24" 1080p) / Windows Vista 64 - www.EditHD.com
DMS Video is offline   Reply With Quote
Old 08-21-2008, 05:27 PM   #4
SRsupport
Grass Cutter Gold
 
SRsupport's Avatar
 
Join Date: May 2007
Location: South America
Posts: 3,353
Default

2 channels split:

1 right clik on 1A an choose Mono 1 1
right click on 2A 2 2

or:
2 map project to bring audio down to ch 1 to A1 and CH2 to A2

or
Save Preset with V track only with audio to A1 and A2

or right click on any track go to properties and choose mono 1 or mono 2 depeding on what you want to hear.

Look in my sig nice link to edius training
__________________
Steve
EDIUS Trainer, Grass Cutter Gold
A proud EDIUS EDITOR
For more information on the Grass Cutter program please visit: http://www.grass-cutters.net

Last edited by SRsupport; 08-21-2008 at 05:55 PM.
SRsupport is offline   Reply With Quote
Old 08-21-2008, 05:48 PM   #5
DMS Video
Senior Member
 
DMS Video's Avatar
 
Join Date: Apr 2008
Location: New York
Posts: 489
Default

Steve,

I tried your first suggestion. The problem is it does bring down both audio channels but I can only hear each channel through one speaker. When edited with My Canopus Storm system what i used to do in the same type of situation was to right click and copy left or right and that would give me stereo on each track and then I could set my levels. I still think there must be a way to do this. Suggestions? Thanks.

David
DMS
__________________
David
DMS Films, New York


Laptop - Edius 7.42 / Intel Core i7 4960X Extreme Edition Desktop / 3.6GHz/4.0GHZ / 32GB Hyper-X Quad Channel 1600MHz Ram / Nvidia GeForce GTX-880 w/ 8GB of GDDR5 Video Memory / (3) 1TB SATA-3 V-NAND SSD / Windows 8.1 64-bit
Desktop - Edius 5.5 / Intel i7 975 Quad Core 3.33GHz / 12GB DDR3 1333MHz / Nvidia GeForce GTX-275 / Vis Title 1.1 / FireCoder-Blu / (2) 27" LCDs / JVC DT-V24L1U (24" 1080p) / Windows Vista 64 - www.EditHD.com
DMS Video is offline   Reply With Quote
Old 08-21-2008, 05:54 PM   #6
SRsupport
Grass Cutter Gold
 
SRsupport's Avatar
 
Join Date: May 2007
Location: South America
Posts: 3,353
Default

1 alt+ enter on the track on A1
choose mono 1 on the audio on track 1

2 alt+ enter on the audio on 2A chose mono 2
see picture

or

Map the output of the sequence so that:
A1 goes out to 1 and 2
A2 goes out 1 and 2

see picture
Attached Images
File Type: png audio out.png (21.0 KB, 31 views)
File Type: png sequence channelmap.png (77.4 KB, 29 views)
__________________
Steve
EDIUS Trainer, Grass Cutter Gold
A proud EDIUS EDITOR
For more information on the Grass Cutter program please visit: http://www.grass-cutters.net

Last edited by SRsupport; 08-21-2008 at 06:15 PM.
SRsupport is offline   Reply With Quote
Old 08-21-2008, 07:12 PM   #7
DMS Video
Senior Member
 
DMS Video's Avatar
 
Join Date: Apr 2008
Location: New York
Posts: 489
Default

Steve,

Thanks for the reply. It's finally working! It's funny how even the most basic task can be tricky (sometimes) when learning new software.

Kind regards,

David
DMS
__________________
David
DMS Films, New York


Laptop - Edius 7.42 / Intel Core i7 4960X Extreme Edition Desktop / 3.6GHz/4.0GHZ / 32GB Hyper-X Quad Channel 1600MHz Ram / Nvidia GeForce GTX-880 w/ 8GB of GDDR5 Video Memory / (3) 1TB SATA-3 V-NAND SSD / Windows 8.1 64-bit
Desktop - Edius 5.5 / Intel i7 975 Quad Core 3.33GHz / 12GB DDR3 1333MHz / Nvidia GeForce GTX-275 / Vis Title 1.1 / FireCoder-Blu / (2) 27" LCDs / JVC DT-V24L1U (24" 1080p) / Windows Vista 64 - www.EditHD.com
DMS Video is offline   Reply With Quote
Old 08-21-2008, 07:26 PM   #8
SRsupport
Grass Cutter Gold
 
SRsupport's Avatar
 
Join Date: May 2007
Location: South America
Posts: 3,353
Default

If you visit the Edius training site there are some how to documents. I I remember correctly Kenneally did a nice document on audio mapping/ channel selection.
__________________
Steve
EDIUS Trainer, Grass Cutter Gold
A proud EDIUS EDITOR
For more information on the Grass Cutter program please visit: http://www.grass-cutters.net
SRsupport is offline   Reply With Quote
Reply
 
Go Back   Grass Valley Forums > Editors > Editing with EDIUS
 

Bookmarks

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
Audio Question Qframe Editing with EDIUS 9 04-10-2008 10:50 PM
ADVC analog audio question... hgmd1250 ADVC 1 01-21-2008 08:18 PM
Audio Mixer question Claire Editing with EDIUS 3 12-08-2007 06:33 PM
Audio from NX card question Brookes Editing with EDIUS 10 06-26-2007 11:13 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are Off
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 02:20 AM.


Copyright 2014 Belden Inc. All rights reserved.