Grass Valley Forums Facebook   Twitter   YouTube  

Go Back   Grass Valley Forums > Converters > ADVC

Thread Tools Display Modes
Old 06-18-2013, 06:55 PM   #1
Junior Member
Join Date: Jun 2013
Location: New York
Posts: 2
Default ADVC-G1 unable to acquire any resolution via DVI-D other than 1080p...

Anyone have any idea as to what could be causing this issue? The unit sees 1080p @ 60 and 29.94Hz just fine, but anything else and the unit is unable to obtain a lock on the signal.

I'm using only a '6 DVI-D cable to connect a switcher to the unit so I would Imagine there is not much data loss or interference, especially since a signal does pas through... I'm at a loss as to why this would happen.

Any help would be appreciated. Thanks!
menicknick is offline   Reply With Quote
Old 06-19-2013, 05:46 PM   #2
Join Date: Apr 2007
Location: Hillsboro, OR
Posts: 5,785

What other kinds of signals are you trying to put through?
Also, is your DVI-D source outputting a PC signal or a Video signal? The timings are different.
For PCs, most modern graphics hardware has the option for HDTV resolutions which will output a signal with video timing rather than PC timing.
GrassValley_BH is offline   Reply With Quote
Go Back   Grass Valley Forums > Converters > ADVC


Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
ADVC G1 Output Frame Rate Inconsistancy franklinux ADVC 3 06-19-2013 05:43 PM
ADVC-G1 "soft" after firmware upgrade Proton ADVC 4 04-07-2012 07:00 PM
ADVC-G1 question on SVGA input to 720p output and aspect ratios e_dauth ADVC 2 01-19-2012 04:08 PM
ADVC-G1 delayed until April Proton ADVC 6 03-22-2011 04:32 PM
VHS Capturing ADVC - Resolution Q acemedusa ADVC 8 08-08-2009 07:12 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are Off
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT +1. The time now is 03:29 AM.

Copyright 2014 Belden Inc. All rights reserved.