Grass Valley Forums Facebook   Twitter   YouTube  

Go Back   Grass Valley Forums > Editors > Editing with EDIUS

Reply
 
Thread Tools Display Modes
Old 07-09-2018, 09:04 PM   #1
createmedia
Senior Member
 
createmedia's Avatar
 
Join Date: May 2007
Location: Four Marks, Alton, UK
Posts: 1,258
Default Edius WG8 vs WG9

I have just come up against a snag

WG8 will play an XAVCI Slog3 3840 by 2160 50p clip with PCC applied but WG9 will not.

WG8 gives no preview out at 50p hence wanting to use WG9

WG9 has to be set to half resolution to get it to work. Even full res 8 Bit won't work.

Why is WG9 less capable than WG8?

System 4 with both WG8 and WG9 Installed.

Mike
__________________
Sys4: Z10PE-D16WS MB 2xE5-2696 Xeon 64 active logical cores. EWG9. 64G RAM. Aorus GTX1080Ti. 55" Q7 1500 NIT HDR 4K TV/Storm 3G Elite/Decklink 4K 12G/8CH audio monitoring, Yamaha RXA-870 A/V. Sys1-3 EWG8 + RX-E1+HDBX1000 MIP in HP xw8600 2 x X5492 CPU 8 cores, 8Gig RAM, Quadro FX3800. All sys Fibre to central media pool - 5TB Axus Yotta RAID + QLogic Fibre Switch. Central VCR rack plus YUV & audio to viewing room with Yamaha AX1 7.1 100 watt per channel amp with 1000W sub 63" HD 3D Samsung TV
createmedia is offline   Reply With Quote
Old 07-10-2018, 01:27 AM   #2
antonsvideo
Senior Member
 
antonsvideo's Avatar
 
Join Date: May 2007
Location: Sydney
Posts: 22,066
Default

do you have graphics card acceleration for PCC enabled in EDIUS 9.2
__________________
Anton Strauss
Antons Video Productions - Sydney

EDIUS 9 WG with Matrox MXO2, Asrock X99 Extreme 6, Intel Core i7 5960X Extreme Haswell-E 8-Core, Corsair Water Cooling, Nvidia Geforce GTX-980, Samsung 860 Pro SSD for System, 8TB Samsung Raid0 SSD for Video, 3 Pioneer BDR-209 Blu-ray/DVD burners, Hotswap Bay for 3.5" Sata and 2.5" SSD, Fractal Design Arc XL Tower, 32GB DDR4 Ram, Win7 Pro
antonsvideo is offline   Reply With Quote
Old 07-10-2018, 12:12 PM   #3
createmedia
Senior Member
 
createmedia's Avatar
 
Join Date: May 2007
Location: Four Marks, Alton, UK
Posts: 1,258
Default

Yes Anton it is enabled.

I just don't understand why files such as UHD XAVC 50p play in desktop apps Media Player, Daum Pot player at only 14% on only one CPU.

In Edius WG9 both CPU's are at 38% and GPU is showing 29%: buffer 1/2, it doesn't seem to be utilising the CPU correctly.

Mike
__________________
Sys4: Z10PE-D16WS MB 2xE5-2696 Xeon 64 active logical cores. EWG9. 64G RAM. Aorus GTX1080Ti. 55" Q7 1500 NIT HDR 4K TV/Storm 3G Elite/Decklink 4K 12G/8CH audio monitoring, Yamaha RXA-870 A/V. Sys1-3 EWG8 + RX-E1+HDBX1000 MIP in HP xw8600 2 x X5492 CPU 8 cores, 8Gig RAM, Quadro FX3800. All sys Fibre to central media pool - 5TB Axus Yotta RAID + QLogic Fibre Switch. Central VCR rack plus YUV & audio to viewing room with Yamaha AX1 7.1 100 watt per channel amp with 1000W sub 63" HD 3D Samsung TV
createmedia is offline   Reply With Quote
Old 07-10-2018, 12:27 PM   #4
antonsvideo
Senior Member
 
antonsvideo's Avatar
 
Join Date: May 2007
Location: Sydney
Posts: 22,066
Default

that makes no sense, it should play

can you also check to make sure optical flow is not set to default
__________________
Anton Strauss
Antons Video Productions - Sydney

EDIUS 9 WG with Matrox MXO2, Asrock X99 Extreme 6, Intel Core i7 5960X Extreme Haswell-E 8-Core, Corsair Water Cooling, Nvidia Geforce GTX-980, Samsung 860 Pro SSD for System, 8TB Samsung Raid0 SSD for Video, 3 Pioneer BDR-209 Blu-ray/DVD burners, Hotswap Bay for 3.5" Sata and 2.5" SSD, Fractal Design Arc XL Tower, 32GB DDR4 Ram, Win7 Pro
antonsvideo is offline   Reply With Quote
Old 07-10-2018, 12:58 PM   #5
createmedia
Senior Member
 
createmedia's Avatar
 
Join Date: May 2007
Location: Four Marks, Alton, UK
Posts: 1,258
Default

Hi Anton

In time effect Optical flow is not set default.

In comparison Premiere Pro is very happy with the clip with a Lumetri LUT applied - it plays smoothly.

I can't either see why it is worse in WG9 than 8.

Mike
__________________
Sys4: Z10PE-D16WS MB 2xE5-2696 Xeon 64 active logical cores. EWG9. 64G RAM. Aorus GTX1080Ti. 55" Q7 1500 NIT HDR 4K TV/Storm 3G Elite/Decklink 4K 12G/8CH audio monitoring, Yamaha RXA-870 A/V. Sys1-3 EWG8 + RX-E1+HDBX1000 MIP in HP xw8600 2 x X5492 CPU 8 cores, 8Gig RAM, Quadro FX3800. All sys Fibre to central media pool - 5TB Axus Yotta RAID + QLogic Fibre Switch. Central VCR rack plus YUV & audio to viewing room with Yamaha AX1 7.1 100 watt per channel amp with 1000W sub 63" HD 3D Samsung TV
createmedia is offline   Reply With Quote
Old 07-10-2018, 01:01 PM   #6
antonsvideo
Senior Member
 
antonsvideo's Avatar
 
Join Date: May 2007
Location: Sydney
Posts: 22,066
Default

what is the preview device in 9.20?
__________________
Anton Strauss
Antons Video Productions - Sydney

EDIUS 9 WG with Matrox MXO2, Asrock X99 Extreme 6, Intel Core i7 5960X Extreme Haswell-E 8-Core, Corsair Water Cooling, Nvidia Geforce GTX-980, Samsung 860 Pro SSD for System, 8TB Samsung Raid0 SSD for Video, 3 Pioneer BDR-209 Blu-ray/DVD burners, Hotswap Bay for 3.5" Sata and 2.5" SSD, Fractal Design Arc XL Tower, 32GB DDR4 Ram, Win7 Pro
antonsvideo is offline   Reply With Quote
Old 07-10-2018, 01:23 PM   #7
createmedia
Senior Member
 
createmedia's Avatar
 
Join Date: May 2007
Location: Four Marks, Alton, UK
Posts: 1,258
Default

The same as in WG8 Decklink 4K Extreme 12G

Disabling the preview device (select OHCI) makes no difference.

Is there any other software that could interfere with Edius?

Last installs: VMIX, Virtual audio cable, Handbrake and TMPGEnc.

AV=ESET NOD32
Malwarebytes latest

Mike
__________________
Sys4: Z10PE-D16WS MB 2xE5-2696 Xeon 64 active logical cores. EWG9. 64G RAM. Aorus GTX1080Ti. 55" Q7 1500 NIT HDR 4K TV/Storm 3G Elite/Decklink 4K 12G/8CH audio monitoring, Yamaha RXA-870 A/V. Sys1-3 EWG8 + RX-E1+HDBX1000 MIP in HP xw8600 2 x X5492 CPU 8 cores, 8Gig RAM, Quadro FX3800. All sys Fibre to central media pool - 5TB Axus Yotta RAID + QLogic Fibre Switch. Central VCR rack plus YUV & audio to viewing room with Yamaha AX1 7.1 100 watt per channel amp with 1000W sub 63" HD 3D Samsung TV
createmedia is offline   Reply With Quote
Old 07-10-2018, 01:32 PM   #8
antonsvideo
Senior Member
 
antonsvideo's Avatar
 
Join Date: May 2007
Location: Sydney
Posts: 22,066
Default

Quote:
Originally Posted by createmedia View Post
Malwarebytes latest

Mike
Malwarebytes Premium latest version has an issue, can you exit it and then start EDIUS and test again
__________________
Anton Strauss
Antons Video Productions - Sydney

EDIUS 9 WG with Matrox MXO2, Asrock X99 Extreme 6, Intel Core i7 5960X Extreme Haswell-E 8-Core, Corsair Water Cooling, Nvidia Geforce GTX-980, Samsung 860 Pro SSD for System, 8TB Samsung Raid0 SSD for Video, 3 Pioneer BDR-209 Blu-ray/DVD burners, Hotswap Bay for 3.5" Sata and 2.5" SSD, Fractal Design Arc XL Tower, 32GB DDR4 Ram, Win7 Pro
antonsvideo is offline   Reply With Quote
Old 07-10-2018, 02:43 PM   #9
createmedia
Senior Member
 
createmedia's Avatar
 
Join Date: May 2007
Location: Four Marks, Alton, UK
Posts: 1,258
Default

MBAM Service can only be stopped the GUI no longer has an exit.

Service stopped no change still wont play, but same project will play clip in WG8
__________________
Sys4: Z10PE-D16WS MB 2xE5-2696 Xeon 64 active logical cores. EWG9. 64G RAM. Aorus GTX1080Ti. 55" Q7 1500 NIT HDR 4K TV/Storm 3G Elite/Decklink 4K 12G/8CH audio monitoring, Yamaha RXA-870 A/V. Sys1-3 EWG8 + RX-E1+HDBX1000 MIP in HP xw8600 2 x X5492 CPU 8 cores, 8Gig RAM, Quadro FX3800. All sys Fibre to central media pool - 5TB Axus Yotta RAID + QLogic Fibre Switch. Central VCR rack plus YUV & audio to viewing room with Yamaha AX1 7.1 100 watt per channel amp with 1000W sub 63" HD 3D Samsung TV
createmedia is offline   Reply With Quote
Old 07-10-2018, 03:29 PM   #10
createmedia
Senior Member
 
createmedia's Avatar
 
Join Date: May 2007
Location: Four Marks, Alton, UK
Posts: 1,258
Default

Just doing a RAID backup then I will update the MB Bios to May 2018 as it is out of date now.
__________________
Sys4: Z10PE-D16WS MB 2xE5-2696 Xeon 64 active logical cores. EWG9. 64G RAM. Aorus GTX1080Ti. 55" Q7 1500 NIT HDR 4K TV/Storm 3G Elite/Decklink 4K 12G/8CH audio monitoring, Yamaha RXA-870 A/V. Sys1-3 EWG8 + RX-E1+HDBX1000 MIP in HP xw8600 2 x X5492 CPU 8 cores, 8Gig RAM, Quadro FX3800. All sys Fibre to central media pool - 5TB Axus Yotta RAID + QLogic Fibre Switch. Central VCR rack plus YUV & audio to viewing room with Yamaha AX1 7.1 100 watt per channel amp with 1000W sub 63" HD 3D Samsung TV
createmedia is offline   Reply With Quote
Reply
 
Go Back   Grass Valley Forums > Editors > Editing with EDIUS
 

Bookmarks

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
Edius WG9 Deck control createmedia EDIUS: Compatible Hardware and Accessories 16 11-15-2017 03:18 PM
Is it possible to Uninstall Edius WG8 manually myname Editing with EDIUS 1 05-28-2016 01:37 AM
Edius WG8 and missing Robuskey Harro Editing with EDIUS 5 11-01-2015 01:27 AM
Edius WG8 Serial numbers createmedia Editing with EDIUS 4 10-30-2015 01:10 AM
Edius WG8 Isotope filters dano3655 EDIUS: Compatible Third Party Products 9 09-25-2015 07:33 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are Off
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 10:28 PM.


Copyright 2014 Belden Inc. All rights reserved.