Grass Valley Forums Facebook   Twitter   YouTube  

Go Back   Grass Valley Forums > Editors > Editing with EDIUS

Reply
 
Thread Tools Display Modes
Old 12-13-2007, 10:46 PM   #1
Matt
Junior Member
 
Matt's Avatar
 
Join Date: May 2007
Location: Sonoma, CA
Posts: 15
Default Multicam issue: one of the two clips is playing the audio track at a slower speed

I'm using Edius 4.24 with REX-RT but the issue is still there when I switch to OHCI mode so I doubt it's a REX specific issue.

the clips play fine by themselves but when I try to sync the two clips in Multi-cam mode it plays one of the clips audio track slower then normal so I am unable to line the clips up properly.

has anyone experienced this before? solution?

please advise, thanks
Matt is offline   Reply With Quote
Old 12-13-2007, 11:45 PM   #2
antonsvideo
Senior Member
 
antonsvideo's Avatar
 
Join Date: May 2007
Location: Sydney
Posts: 22,062
Default

do both tracks consist of clips with 16bit 48k audio?

if one has 32, then you will get this problem

btw, you can line up clips by looking at the audio waveform, zoom right in to 1 frame level
__________________
Anton Strauss
Antons Video Productions - Sydney

EDIUS 9 WG with Matrox MXO2, Asrock X99 Extreme 6, Intel Core i7 5960X Extreme Haswell-E 8-Core, Corsair Water Cooling, Nvidia Geforce GTX-980, Samsung 860 Pro SSD for System, 8TB Samsung Raid0 SSD for Video, 3 Pioneer BDR-209 Blu-ray/DVD burners, Hotswap Bay for 3.5" Sata and 2.5" SSD, Fractal Design Arc XL Tower, 32GB DDR4 Ram, Win7 Pro
antonsvideo is offline   Reply With Quote
Old 12-14-2007, 12:32 AM   #3
Matt
Junior Member
 
Matt's Avatar
 
Join Date: May 2007
Location: Sonoma, CA
Posts: 15
Default thanks for the tip... I'll check that out

I have 2 TRV900's and they should both be set to 48KHz, but I will check the properties of the file. thanks
Matt is offline   Reply With Quote
Old 12-14-2007, 06:08 PM   #4
Matt
Junior Member
 
Matt's Avatar
 
Join Date: May 2007
Location: Sonoma, CA
Posts: 15
Default Both clips have 48KHz audio... any other ideas?

hopefully it's not a version issue as I don't want to update from 4.24 as this will disable my REXRT.
Matt is offline   Reply With Quote
Old 12-15-2007, 02:09 AM   #5
antonsvideo
Senior Member
 
antonsvideo's Avatar
 
Join Date: May 2007
Location: Sydney
Posts: 22,062
Default

when you enable the audio waveforms, find a lineup point and line them up, do they line up for the entire length of the clip or do they drift from one to another? are both clips PAL or NTSC?
__________________
Anton Strauss
Antons Video Productions - Sydney

EDIUS 9 WG with Matrox MXO2, Asrock X99 Extreme 6, Intel Core i7 5960X Extreme Haswell-E 8-Core, Corsair Water Cooling, Nvidia Geforce GTX-980, Samsung 860 Pro SSD for System, 8TB Samsung Raid0 SSD for Video, 3 Pioneer BDR-209 Blu-ray/DVD burners, Hotswap Bay for 3.5" Sata and 2.5" SSD, Fractal Design Arc XL Tower, 32GB DDR4 Ram, Win7 Pro
antonsvideo is offline   Reply With Quote
Old 12-15-2007, 08:03 PM   #6
Matt
Junior Member
 
Matt's Avatar
 
Join Date: May 2007
Location: Sonoma, CA
Posts: 15
Default

I started a new project and audio is playing back fine now in Multi-CAM mode. Not sure what was causing the slow down of audio on one of the tracks... but all is well now and the sync is working all the way through the clips (NTSC).

if one of the tracks was set to monaural instead of stereo, could that cause it? That's the only thing I can think of that was set differently when I compared the settings.

anyway, thanks for your help Anton
Matt is offline   Reply With Quote
Reply
 
Go Back   Grass Valley Forums > Editors > Editing with EDIUS
 

Bookmarks

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
multicam and audio editing mistake skier-hughes Editing with EDIUS 13 09-14-2007 03:09 PM
Added Audio Clips only go int VA Track Bluetongue Editing with EDIUS 2 05-31-2007 05:58 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are Off
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 12:05 AM.


Copyright 2014 Belden Inc. All rights reserved.