Grass Valley Forums Facebook   Twitter   YouTube  

Go Back   Grass Valley Forums > Editors > EDIUS: Compatible Hardware and Accessories

Reply
 
Thread Tools Display Modes
Old 11-11-2015, 03:10 PM   #1
Cobra427
Senior Member
 
Join Date: Nov 2010
Location: Apeldoorn, Netherlands
Posts: 289
Default Performance setting, overclock and Turbo

I have set my PC to performance as explained on Anton's website.

However I do have some questions about that:
- Does this mean that my processor will always be on maximum speed and thus on maximum dissipation?
- does a lower setting mean that the processor will only step up to a higher speed when nessesary? (and be on a low speed when idling)

I am thinking of overclocking the turbo of my processor (5930K) to a slightly higher speed (from 3.7MHz to 4.1MHz or 4.2MHz), but I only want this speed and powerconsumption and extra heat when it is needed (say during rendering or playing a complex timeline). I can find manuals about overclocking, but none says anything about just overclocking the Turbo.

I also use my PC for other activities like Internet and MS Office. At those times I don't need the extra speed and powerconsumption.
__________________
System: Gigabyte Z390 Aorus Pro, Win10, i9 9900K, 16 Gb RAM 3200MHz, M2 SSD 250Gb for OS and Edius, M2 SSD 500Gb for projectfiles, several HDD for archieving, dual screen Benq PD2700U, GTX1070, Corsair H115i Watercooling, E9.5WG, Mercalli V4, TPMG Authoring Works 5, Sony fdr-ax700
Cobra427 is offline   Reply With Quote
Old 11-12-2015, 06:17 AM   #2
antonsvideo
Senior Member
 
antonsvideo's Avatar
 
Join Date: May 2007
Location: Sydney
Posts: 22,119
Default

my 5960x runs at 100% all the time and when you don't do anything, they are not used, it is only clock speed, the temp is very low, like 35C with corsair water cooler for cpu is used

heat only builds up when you exporting say to mpeg2 HD and all cores are used 100%

I can export a one hour HD timeline to mpeg2 HD in 4min and all cores at 100% raise CPU temp to 55C (bugger all)
__________________
Anton Strauss
Antons Video Productions - Sydney

EDIUS 9 WG with Matrox MXO2, Asrock X99 Extreme 6, Intel Core i7 5960X Extreme Haswell-E 8-Core, Corsair Water Cooling, Nvidia Geforce GTX-980, Samsung 860 Pro SSD for System, 8TB Samsung Raid0 SSD for Video, 3 Pioneer BDR-209 Blu-ray/DVD burners, Hotswap Bay for 3.5" Sata and 2.5" SSD, Fractal Design Arc XL Tower, 32GB DDR4 Ram, Win7 Pro
antonsvideo is online now   Reply With Quote
Old 11-13-2015, 02:28 PM   #3
Cobra427
Senior Member
 
Join Date: Nov 2010
Location: Apeldoorn, Netherlands
Posts: 289
Default

Thanks Anton,

I have read that overclocking the processor will increase heat and powerconsumption alot. I was hoping that by lowering the settings the processor will only go to high speed and powerconsumption when needed (like your example when exporting to mpeg-2) and it will idle at low processor speed and powerconsumption.

Is that correct?

Chris
__________________
System: Gigabyte Z390 Aorus Pro, Win10, i9 9900K, 16 Gb RAM 3200MHz, M2 SSD 250Gb for OS and Edius, M2 SSD 500Gb for projectfiles, several HDD for archieving, dual screen Benq PD2700U, GTX1070, Corsair H115i Watercooling, E9.5WG, Mercalli V4, TPMG Authoring Works 5, Sony fdr-ax700
Cobra427 is offline   Reply With Quote
Old 11-13-2015, 02:55 PM   #4
Jerry
Senior Member
 
Jerry's Avatar
 
Join Date: May 2007
Location: Orange City, FL
Posts: 11,686
Default

The increase of power and heat will depend on your CPU, CPU cooler, and your case cooling. The increase in power is going to be a given. But, you can control the heat.
This will add another variable: fan speed vs noise level.

I've been using Corsair sealed watercooling units since 2011.
They are now dependable, comparable in pricing to a high end air cooler, and in some scenarios easier to install than air units. They also provide for a better case cooling environment.

Make sure your case and chip have sufficient cooling before jacking the speed.
It may not need it, but it's best to be covered.
__________________
Jerry
Six Gill DV
www.sgdvtutorials.com
If you own the Tutorials and you need help, PM me.

Vistitle YouTube Channel
https://www.youtube.com/channel/UCMVlxC8Am4qFbkXJRoPAnMQ/videos

Windows 10 Pro up to v.1803 Tweaks for Edius Users
http://sgdvtutorials.com/WIN%2010%20...%20V.2.0.0.pdf

Main System: Azrock Z97 Extreme 6, 4790K@4.7Ghz, 32gb ram, Corsair H110, Win10 Pro 64, Samsung 850 pro, E7.5/8.5/E9 on separate SSD drives, HD Spark, Intensity Shuttle, 12tb RAID 0 on backplane ,2 BD, Benq 27 and Hanns-G 28 monitors, CC 2019, GTX 1080ti SC Black.
Both systems on Gigabit network
Second System: EditHD Ultimax-i7, X58, 980x@3.74, Corsair H80, Win764, 24gb ram, Storm 3g, Samsung 840 Pro 256, 4tb and 6tb RAID 0 on backplane, GTX 980ti Classified, Edius 9, Apple 30", Samsung 24", dual BD.
Jerry is offline   Reply With Quote
Old 11-13-2015, 11:54 PM   #5
antonsvideo
Senior Member
 
antonsvideo's Avatar
 
Join Date: May 2007
Location: Sydney
Posts: 22,119
Default

Quote:
Originally Posted by Cobra427 View Post
Thanks Anton,

I have read that overclocking the processor will increase heat and powerconsumption alot. I was hoping that by lowering the settings the processor will only go to high speed and powerconsumption when needed (like your example when exporting to mpeg-2) and it will idle at low processor speed and powerconsumption.

Is that correct?

Chris
you don't save on heat or power consumption

when processor is set to 100% min and 100% max state, it does not build up heat when sitting idle

like I said, my CPU is on 35C when not used, even though min state is 100%
__________________
Anton Strauss
Antons Video Productions - Sydney

EDIUS 9 WG with Matrox MXO2, Asrock X99 Extreme 6, Intel Core i7 5960X Extreme Haswell-E 8-Core, Corsair Water Cooling, Nvidia Geforce GTX-980, Samsung 860 Pro SSD for System, 8TB Samsung Raid0 SSD for Video, 3 Pioneer BDR-209 Blu-ray/DVD burners, Hotswap Bay for 3.5" Sata and 2.5" SSD, Fractal Design Arc XL Tower, 32GB DDR4 Ram, Win7 Pro
antonsvideo is online now   Reply With Quote
Reply
 
Go Back   Grass Valley Forums > Editors > EDIUS: Compatible Hardware and Accessories
 

Bookmarks

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
Turbo-R wont boot windows Hodder_S Working with K2 Dyno 2 07-11-2014 03:50 PM
Export settings Turbo iDDR KL_GBG Editing with EDIUS 1 11-17-2008 10:07 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are Off
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 01:07 PM.


Copyright 2014 Belden Inc. All rights reserved.