Grass Valley Forums Facebook   Twitter   YouTube  

Go Back   Grass Valley Forums > Editors > Editing with EDIUS

Reply
 
Thread Tools Display Modes
Old 12-07-2013, 02:53 PM   #1
gazzagreen
Junior Member
 
gazzagreen's Avatar
 
Join Date: Mar 2009
Location: UK
Posts: 10
Default Syncing up Mulicam projects

Just wondering if anyone has heard on the grapevine if Grass Valley are going to help sync up complex multi-cam projects with audio, much in the same way as FCPX does, and Premier Pro CS6 (cloud edition) does, and of course Plural-Eyes did pre-Edius vrs7?

I think with so many off-camera recording devices and multi-camera projects these days, it's only logical to include this kind of syncing tool in such a high end NLE tool?
__________________
Edius 5, quad core 266GHz, 4gig Ram, EDIUS NX Series (PCIe) 2 cards, Windows vista 64bit (service pack 2), 600gig raid HardDrive
gazzagreen is offline   Reply With Quote
Old 02-18-2014, 08:38 AM   #2
Brookes
Senior Member
 
Brookes's Avatar
 
Join Date: May 2007
Location: Gold Coast
Posts: 142
Default

Agree, but I would not hold your breath, it seems logical, but then again, these things always do.
Brookes is offline   Reply With Quote
Old 02-19-2014, 09:18 PM   #3
E-ditor
Junior Member
 
E-ditor's Avatar
 
Join Date: Oct 2012
Location: Greece
Posts: 23
Default

I am doing this for years now. Just set the same time to the cameras and Edius will synchronize them. (sync option rec time)
__________________
Intel core i7 4770,Asrock Z87 Extreme 4,32Gb RAM,2x Kingston 180GB KC300 in RAID (Stripe mode) for operating system, 2x3TB and 4X2TB HDDs, Win 8 Pro x64 ENG, Thermaltake Level 10GT Full Tower, Intel HD4600 only, no external Graphic Cards
E-ditor is offline   Reply With Quote
Old 02-20-2014, 04:19 PM   #4
RonnieMartin
Senior Member
 
RonnieMartin's Avatar
 
Join Date: May 2007
Location: Brandon, Mississippi
Posts: 709
Default

Several yeas ago with an earlier version of Edius, just before we started recording an event with several cameras at one minute (with cameras running) before the event began, we would all pont our cameras at a person on the stage and he would take a flash picture with a small digital camera. In post, we would just put the clips from each camera on the timeline in edius and then adjust them to the frame that displayed the flash. It was probably not the best way to sync the cameras but it worked.

Ronnie
__________________
Ronnie Martin
Kato Video Productions
main system: custom built by Edit HD Ultma 277,Intel (R) core (TM) i7 2600K cpu 3.40 GHz 3.40Ghz, 16GB ram, Windows 7, Intel HD (R) graphics 3000, NVIDA Gforce GT 440, C drive Samsung SSD 850 pro, video drive WD 3TB SATA, 2 LG Bluray drives, External WD SATA 2TB storage/backup drives in thermaltake Black device. edius 8.3 WG
RonnieMartin is offline   Reply With Quote
Old 02-20-2014, 05:34 PM   #5
Rusty
Senior Member
 
Join Date: May 2007
Location: Sacramento, CA
Posts: 3,399
Default

Yesterday I had to sync two cameras with a total of 3 clips on two tracks.
There were zero distinguishable similar frames and both cameras had wind in all the mics.
Although I've been at this for years, it took over 15 min. to sync a 20 min. sequence.
:~/
__________________
Rusty Rogers | Films
>TYAN S7025 - 32GB RAM, 2 x Xeon X5690's, 4 x 10k video HD's, Win10 x64, BM DecklinkHD, nVidia TITAN, 12TB DroboPro w/iSCISI connection
>RAZER BLADE - QHD+ - 16GB RAM, i7-6700HQ Quad, 512GB SSD, Win10 x64, GeForce GTX 1060 6GB

An inglorious peace is better than a dishonorable war.
Twain - "Glances at History" 1906
Rusty is offline   Reply With Quote
Reply
 
Go Back   Grass Valley Forums > Editors > Editing with EDIUS
 

Bookmarks

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
DSLR syncing zvit EDIUS: Compatible Third Party Products 13 12-09-2013 10:02 PM
Syncing clips to beat is off smontoto Editing with EDIUS 2 11-17-2011 07:47 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are Off
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 03:00 PM.


Copyright 2014 Belden Inc. All rights reserved.