Grass Valley Forums Facebook   Twitter   YouTube  

Go Back   Grass Valley Forums > Editors > Editing with EDIUS

Reply
 
Thread Tools Display Modes
Old 06-28-2007, 07:12 AM   #1
witchdoctor
Member
 
Join Date: Jun 2007
Location: Silver City, NM
Posts: 35
Default Two brief questions

First, I have a DVCPRO HD 720 60p clip that has one frame with two white spots. Unknown if it occurred during recording or perhaps during copying. Is there an easy way to delete one frame on the timeline ?

Second, when doing dissolves into material that has only a few frames of "fluff" before an important part, is there a way to clone the first frame of the "dissolve into" video so that the important part is not included in the dissolve ?
witchdoctor is offline   Reply With Quote
Old 06-28-2007, 07:31 AM   #2
antonsvideo
Senior Member
 
antonsvideo's Avatar
 
Join Date: May 2007
Location: Sydney
Posts: 22,339
Default

1. zoom to frame level, cut with C key at start of bad frame and cut with c key at end of bad frame

select the bad frame and press alt+delete

2. cut with C key at start of important bit, apply slow motion, try 25% to the few remaining frames in front of the cut and add the dissolve
__________________
Anton Strauss
Antons Video Productions - Sydney

EDIUS 9 WG with Matrox MXO2, Gigabyte X299 UD4 Pro, Intel Core i9 9960X 16 Core, 32 Threads @ 4.3Ghz, Corsair Water Cooling, Gigabyte RTX-2070 Super 3X 8GB Video Card, Samsung 860 Pro 512GB SSD for System, 8TB Samsung Raid0 SSD for Video, 2 Pioneer BDR-209 Blu-ray/DVD burners, Hotswap Bay for 3.5" Sata and 2.5" SSD, Phanteks Enthoo Pro XL Tower, Corsair 32GB DDR4 Ram, Win10 Pro
antonsvideo is offline   Reply With Quote
Old 06-28-2007, 06:52 PM   #3
GrassValley_MD
Mike Downey... The Jollymon
 
GrassValley_MD's Avatar
 
Join Date: Apr 2007
Location: Lehi, Ut
Posts: 968
Default

Another way...

Zoom into the timeline to the frame level, set an in and out point over the frame(s) and then select the Alt-D key combination to delete between the in and out point and then close the gap.
GrassValley_MD is offline   Reply With Quote
Reply
 
Go Back   Grass Valley Forums > Editors > Editing with EDIUS
 

Bookmarks

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
TBC Questions jriker1 ADVC 18 03-26-2008 12:26 AM
Some Rather Basic HD Questions Fred Dwyer Editing with EDIUS 0 03-08-2008 12:41 AM
Newbie questions about Canopus hardware/software Valter_Sa Editing with EDIUS 9 01-17-2008 05:02 PM
Post your EDIUS v4.5 questions here... GrassValley_KH Editing with EDIUS 216 08-06-2007 04:49 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are Off
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 08:08 PM.


Copyright 2014 Belden Inc. All rights reserved.