Grass Valley Forums Facebook   Twitter   YouTube  

Go Back   Grass Valley Forums > Editors > EDIUS: Compatible Hardware and Accessories

Reply
 
Thread Tools Display Modes
Old 11-30-2018, 06:18 PM   #1
Liverpool TV
Senior Member
 
Join Date: Nov 2013
Location: Liverpool, England.
Posts: 2,898
Default Low end PC for Edius - video example

Hello Edius Forum.

For anyone interested in such things, here's a video showing Edius 8.5 running on a cheap 100 second hand PC.

All specs are mentioned in the video. There's two tests. One being a 10 Bit project in 1080 at 60FPS using HQX media that was acquired via HDMI on an Elgato HD60 Pro.

The other is a project being switched between 8 and 10 bit at 1080 and UHD/4K using native camera files, Sony XAVC S 25FPS UHD.

Cheers,
Dave.

https://www.youtube.com/watch?v=UPB4DroAzRc

__________________
"There's only one thing more powerful than knowledge. The free sharing of it"

If you don't know the difference between Azimuth and Asimov, then either your tapes sound bad and your Robot is very dangerous. Kill all humans...... Or your tape deck won't harm a human, and your Robot's tracking and stereo imagining is spot on.

Is your Robot three laws safe?
Liverpool TV is offline   Reply With Quote
Reply
 
Go Back   Grass Valley Forums > Editors > EDIUS: Compatible Hardware and Accessories
 

Bookmarks

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
high end pc with 6-core or onboard-graphics? (regarding Quick Sync) thomas_alemania EDIUS: Compatible Hardware and Accessories 0 10-25-2015 05:12 PM
END OF EDIUS!?! "Grass Valley Announces The End Of Service For Selected Products" OneQuickSix Editing with EDIUS 11 11-06-2014 10:50 AM
I have a powerful PC but low performance rate Ulisse EDIUS: Compatible Hardware and Accessories 17 06-14-2011 02:23 PM
Low video question rando Editing with EDIUS 1 08-13-2010 10:19 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are Off
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 05:37 AM.


Copyright 2014 Belden Inc. All rights reserved.