Mync 1.41 now available

John Hooper · 08-23-2018, 05:54 PM

https://myncworld.com/en/support/howtouse/version-1-41/

antonsvideo · 08-24-2018, 12:37 AM

this is for standalone on PCs that do not have EDIUS

John Hooper · 08-24-2018, 09:56 AM

Quote:

Originally Posted by antonsvideo

this is for standalone on PCs that do not have EDIUS

I don't think that is true. I have Edius and Mync (although I don't use it that much). The update appears in the "news" section of Mync.

This thread was an earlier posting about Mync updates:

https://forum.grassvalley.com/forum/...t=41380&page=2

See post #17 from Steve (Grassvalley_SL)

GrassValley_SL · 08-24-2018, 12:17 PM

My answer was specific to an installation with EDIUS and Mync when the installed bundled version of Mync gives an update notification.

(Not checking the Mync standalone version site for updates)

John Hooper · 08-24-2018, 04:41 PM

Quote:

Originally Posted by GrassValley_SL

My answer was specific to an installation with EDIUS and Mync when the installed bundled version of Mync gives an update notification.

(Not checking the Mync standalone version site for updates)

Steve, the bundled version of Mync did give me a notification.

I have Edius 8.53 and Mync. I opened Mync yesterday, and the update was listed there (see screenshot). It then sent me to the webpage I gave in my first post.

I really don't see the problem, surely an update is an update? I didn't think there was more than one version of Mync Standard?

John Hooper · 09-19-2018, 02:52 PM

I have now opened Mync today and it tells me version 1.5 is avaialble.

Can someone please tell me if these messages are normal and OK to update?

From previous replies from Anton and Steve, it would appear that such updates should occur only when Edius itself receives updates.

GrassValley_SL · 09-19-2018, 03:50 PM

As I said before if the installed version that came with EDIUS gives an update notification is perfectly fine to update. Trough the offered link.

08-24-2018, 12:37 AM	#2
antonsvideo Senior Member Join Date: May 2007 Location: Sydney Posts: 22,113	this is for standalone on PCs that do not have EDIUS __________________ Anton Strauss Antons Video Productions - Sydney EDIUS 9 WG with Matrox MXO2, Asrock X99 Extreme 6, Intel Core i7 5960X Extreme Haswell-E 8-Core, Corsair Water Cooling, Nvidia Geforce GTX-980, Samsung 860 Pro SSD for System, 8TB Samsung Raid0 SSD for Video, 3 Pioneer BDR-209 Blu-ray/DVD burners, Hotswap Bay for 3.5" Sata and 2.5" SSD, Fractal Design Arc XL Tower, 32GB DDR4 Ram, Win7 Pro

08-24-2018, 12:17 PM	#4
GrassValley_SL Moderator Join Date: Mar 2010 Location: SA Posts: 7,785	My answer was specific to an installation with EDIUS and Mync when the installed bundled version of Mync gives an update notification. (Not checking the Mync standalone version site for updates) __________________ Steve Please don't send me Private Messages for support. Contact Grass Valley support

09-19-2018, 02:52 PM	#6
John Hooper Senior Member Join Date: Mar 2010 Location: UK Posts: 2,126	I have now opened Mync today and it tells me version 1.5 is avaialble. Can someone please tell me if these messages are normal and OK to update? From previous replies from Anton and Steve, it would appear that such updates should occur only when Edius itself receives updates. __________________ Edius 8.53WG, Vistitle 2.8, Windows 10 x64 Pro Fall Update, Asus Z87 Pro, Intel i7-4770K, 16 GB 1600 Corsair Vengence LP RAM, Samsung 840 Pro SSD 256GB, WD Black 2TB media drive, Intel HD 4600 GPU, MSI GTX660 2GB VGA, Coolermaster Silencio 652 case, Noctua NH-U12S CPU cooler, Cakewalk UA-25EX USB audio interface, Cakewalk MA-15D monitor speakers, BM Intensity Pro 4K, PlextorPX-LB950SA BD writer, Dell U2410 Monitor

09-19-2018, 03:50 PM	#7
GrassValley_SL Moderator Join Date: Mar 2010 Location: SA Posts: 7,785	As I said before if the installed version that came with EDIUS gives an update notification is perfectly fine to update. Trough the offered link. __________________ Steve Please don't send me Private Messages for support. Contact Grass Valley support

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-23-2018, 05:54 PM	#1
John Hooper Senior Member Join Date: Mar 2010 Location: UK Posts: 2,126	Mync 1.41 now available https://myncworld.com/en/support/howtouse/version-1-41/ __________________ Edius 8.53WG, Vistitle 2.8, Windows 10 x64 Pro Fall Update, Asus Z87 Pro, Intel i7-4770K, 16 GB 1600 Corsair Vengence LP RAM, Samsung 840 Pro SSD 256GB, WD Black 2TB media drive, Intel HD 4600 GPU, MSI GTX660 2GB VGA, Coolermaster Silencio 652 case, Noctua NH-U12S CPU cooler, Cakewalk UA-25EX USB audio interface, Cakewalk MA-15D monitor speakers, BM Intensity Pro 4K, PlextorPX-LB950SA BD writer, Dell U2410 Monitor

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Trimming problem in 7.41	primatv	Editing with EDIUS	0	12-18-2014 08:36 PM
EDIUS 7.41 error	kermitol	Editing with EDIUS	0	12-12-2014 04:47 PM
Udate 7.41.28 Quicksync Gone	wags	Editing with EDIUS	3	12-04-2014 10:24 AM