ADVC300 - No full connection with Premiere Pro CS3 - Page 2

kbosward · 07-07-2008, 02:31 AM

I think you've shown that the problem lies with CS3 and not with your computer or the ADVC300. You might be better off pursuing this in the Adobe forums.

My only other thought is a clean install of CS3 (it seems you upgraded from PPro 1.5 rather than a clean install?)

Ken.

**GrassValley_BH** · 07-07-2008, 10:22 AM

I agree with Ken - it's quite possible that the PPro 1.5 installation didn't fully remove itself, perhaps leaving some system components behind, and those remnants are conflicting with CS3.

If you have another machine that doesn't have PPro 1.5 installed, try installing CS3 on there (don't forget to de-activate your installations when you uninstall them!).

chimimic · 07-07-2008, 07:21 PM

Hi Ken and Brandon,

thanks for your replies.

Sure problem seems related to CS3. And yes, I did an update over PP V1.5.
Try installing CS3 on another computer is a good idea, thanks for reminder about deactivation of the one already installed ;-)

I'll put here some feedback after other tests.

Thanks again to all,
and kindest regards.

Remy
(France)

chimimic · 08-11-2008, 09:21 PM

Hi to all,

as promised, a little feedback after some other tests.

The computer used to make newer tests with CS3 is an Asus laptop that run under Vista Pro SP1. As this computer has no native IEEE1394 interface, I bought an external ExpressCard / FireWire adapter (LaCie FireWire 800 ExpressCard 34), associated to an FF800 / DV cable.

All run fine with this configuration, direct connection of a DV camcorder (tried 3 different Sony models) or use of ADVC300 give excellent and stable results.

So, I can now try to uninstall all Premiere components on my primary working computer, and see what happen after reinstall.

Regards,
Remy

chimimic · 12-20-2008, 04:37 PM

Hi to all.

I think I have found the cause of the previously described problem, that seem to be consequent to installation of Steinberg Cubase 4, on a not updated Windows XP Pro SP2 (no internet connection, no automatic updates). The setup of Cubase 4 install some components of DirectX 9.0c that I can't bypass.

If I restaure my DAW with a previous Ghost image containing the previous Cubase version (SX3) and then install PP CS3 on the fresh restored system, capture can be done without problem.

As I can't deactivate installation of DirectX components from Cubase installation, I decided to live with this little problem. Capture from OnLocation now works well, and if I'm not totally happy with this piece of software, I always can make acquisition on my laptop computer and its external HD.

Happy day to all.
Remy

**GrassValley_BH** · 12-24-2008, 04:30 AM

Thank you for sharing the source of the problem Remy!

Ringmur · 04-11-2018, 11:02 PM

Hello I can not connect Canopus ADVC300 to Adobe Premiere Elements 15 and Adobe Premiere Elements 2018. I'm using Firewire connection. I get an error message No device can be found.

dpalomaki · 04-18-2018, 03:58 PM

Wow! A 10 year old thread.

What OS and type of IEEE1394 port are you using?

Can you connect to other IEEE1394 port video srouces such as a camcorder?

04-11-2018, 11:02 PM	#17
Ringmur Junior Member Join Date: Apr 2018 Location: Visby, Sweden Posts: 1	Canopus ADVC 300 connection error Hello I can not connect Canopus ADVC300 to Adobe Premiere Elements 15 and Adobe Premiere Elements 2018. I'm using Firewire connection. I get an error message No device can be found.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Procoder 3 and Premiere Pro CS3	mark_m	ProCoder	5	01-15-2010 01:31 PM
Premiere CS4 or Edius	swsw1550	Editing with EDIUS	37	10-16-2008 03:36 AM
Plugin for Premiere PRO CS3	shueardm	ProCoder	7	09-14-2008 09:27 PM
Premiere Pro CS3	akribie	ProCoder	5	06-27-2008 12:45 AM
Edius NX ADVC + Premiere Pro CS3 ?	strikemercury	Editing with EDIUS	7	04-14-2008 04:55 AM

07-07-2008, 02:31 AM	#11
kbosward Senior Member Join Date: May 2007 Location: Australia Posts: 318	I think you've shown that the problem lies with CS3 and not with your computer or the ADVC300. You might be better off pursuing this in the Adobe forums. My only other thought is a clean install of CS3 (it seems you upgraded from PPro 1.5 rather than a clean install?) Ken.

07-07-2008, 10:22 AM	#12
GrassValley_BH Demystifier/Analogizer Join Date: Apr 2007 Location: Hillsboro, OR Posts: 5,785	I agree with Ken - it's quite possible that the PPro 1.5 installation didn't fully remove itself, perhaps leaving some system components behind, and those remnants are conflicting with CS3. If you have another machine that doesn't have PPro 1.5 installed, try installing CS3 on there (don't forget to de-activate your installations when you uninstall them!).

07-07-2008, 07:21 PM	#13
chimimic Junior Member Join Date: Jun 2008 Location: France Posts: 12	Hi Ken and Brandon, thanks for your replies. Sure problem seems related to CS3. And yes, I did an update over PP V1.5. Try installing CS3 on another computer is a good idea, thanks for reminder about deactivation of the one already installed ;-) I'll put here some feedback after other tests. Thanks again to all, and kindest regards. Remy (France)

08-11-2008, 09:21 PM	#14
chimimic Junior Member Join Date: Jun 2008 Location: France Posts: 12	Hi to all, as promised, a little feedback after some other tests. The computer used to make newer tests with CS3 is an Asus laptop that run under Vista Pro SP1. As this computer has no native IEEE1394 interface, I bought an external ExpressCard / FireWire adapter (LaCie FireWire 800 ExpressCard 34), associated to an FF800 / DV cable. All run fine with this configuration, direct connection of a DV camcorder (tried 3 different Sony models) or use of ADVC300 give excellent and stable results. So, I can now try to uninstall all Premiere components on my primary working computer, and see what happen after reinstall. Regards, Remy

12-20-2008, 04:37 PM	#15
chimimic Junior Member Join Date: Jun 2008 Location: France Posts: 12	Hi to all. I think I have found the cause of the previously described problem, that seem to be consequent to installation of Steinberg Cubase 4, on a not updated Windows XP Pro SP2 (no internet connection, no automatic updates). The setup of Cubase 4 install some components of DirectX 9.0c that I can't bypass. If I restaure my DAW with a previous Ghost image containing the previous Cubase version (SX3) and then install PP CS3 on the fresh restored system, capture can be done without problem. As I can't deactivate installation of DirectX components from Cubase installation, I decided to live with this little problem. Capture from OnLocation now works well, and if I'm not totally happy with this piece of software, I always can make acquisition on my laptop computer and its external HD. Happy day to all. Remy

12-24-2008, 04:30 AM	#16
GrassValley_BH Demystifier/Analogizer Join Date: Apr 2007 Location: Hillsboro, OR Posts: 5,785	Thank you for sharing the source of the problem Remy!

04-18-2018, 03:58 PM	#18
dpalomaki Senior Member Join Date: Oct 2007 Location: USA Posts: 1,885	Wow! A 10 year old thread. What OS and type of IEEE1394 port are you using? Can you connect to other IEEE1394 port video srouces such as a camcorder?