Grass Valley Forums Facebook   Twitter   YouTube  

Go Back   Grass Valley Forums > Editors > Editing with EDIUS

Reply
 
Thread Tools Display Modes
Old 05-15-2007, 07:28 AM   #1
antonsvideo
Senior Member
 
antonsvideo's Avatar
 
Join Date: May 2007
Location: Sydney
Posts: 21,821
Default PCI-e NX mounting

I just built a PC for customer with PCI-e NX

I am concered about the missing support for the card at the rear end

the PCI-e is so narrow that you can see the whole card wobble around when inserting and removing video connectors at the card edge, this surely will cause mobo connection problems further down the track? there must be an optional rear card support?

the previous PCI-X models were rock solid mounted due to the wide slot, you could not wobble them even with Arnold Schwarzenegger hands
__________________
Anton Strauss
Antons Video Productions - Sydney

EDIUS 9 WG with Matrox MXO2, Asrock X99 Extreme 6, Intel Core i7 5960X Extreme Haswell-E 8-Core, Corsair Water Cooling, Nvidia Geforce GTX-980, Samsung 860 Pro SSD for System, 8TB Samsung Raid0 SSD for Video, 3 Pioneer BDR-209 Blu-ray/DVD burners, Hotswap Bay for 3.5" Sata and 2.5" SSD, Fractal Design Arc XL Tower, 32GB DDR4 Ram, Win7 Pro
antonsvideo is offline   Reply With Quote
Old 05-15-2007, 07:46 PM   #2
Rusty
Senior Member
 
Join Date: May 2007
Location: Sacramento, CA
Posts: 3,399
Default

When I used tower cases this was a big problem, even back in Rex days.

I now use rack mount cases with support from above and there is no problems. Maybe not the solution you were after, but it works for me!

Arnold's current solution involves additional hair gel.

Rusty
Rusty is offline   Reply With Quote
Old 05-15-2007, 11:57 PM   #3
shueardm
Senior Member
 
Join Date: May 2007
Location: South Australia
Posts: 3,503
Default

Rusty,

Please explain. I dont see how Rackmount cases would effect the footprint of a PCi-e card in any way.
shueardm is offline   Reply With Quote
Reply
 
Go Back   Grass Valley Forums > Editors > Editing with EDIUS
 

Bookmarks

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
Why is "One free 5.25-inch mounting bay" require for NX Express? JackB Editing with EDIUS 19 01-06-2009 03:29 AM
NX Pci express and premiere pro 1.5 kevin Editing with EDIUS 0 12-15-2008 12:19 AM
NX Pci express and premiere pro 1.5 kevin Editing with EDIUS 9 12-04-2008 12:11 AM
EDIUS NX Express system build PCI express slot requirements Please. Imagine Video Editing with EDIUS 4 11-09-2007 09:58 PM
ASUS P5K and Pci Express for Edius NX Express tpsvideo Editing with EDIUS 1 09-15-2007 03:21 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are Off
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 09:38 PM.


Copyright 2014 Belden Inc. All rights reserved.