Grass Valley Forums Facebook   Twitter   YouTube  

Go Back   Grass Valley Forums > Editors > Editing with EDIUS

Reply
 
Thread Tools Display Modes
Old 02-21-2020, 02:09 PM   #1
dmkvideo
Junior Member
 
Join Date: May 2018
Location: Belgium
Posts: 3
Default Math bug in the YUV Curve filter

Math bug in the YUV Curve filter

In Edius 7 to 9, the YUV Curve filter creates incorrect values in the U and V components only if the project is set in 10 bit.

1) Make a 10 bit project. Resolution has no importance
2) Put a gray clip or still or a gray YUV ramp on the timeline
3) On the Vectorscope, U and V are at 512, which is OK
4) Put a YUV Curve filter in the clip: U and V are always at 512, OK
6) Add a control point on the Y or the U or the V curve with the same x and y coordinates. This can be easy donne if the Linear check boxes are activated.
7) The U and V components are now shifted to 510 on the Vectorscope, on the external monitor and in the rendered file while they should stay at 512. The clip is no more totally gray.

Intel i7 8700K with Intel Graphic 630 + Blackmagic Intensity Pro 4K
dmkvideo is offline   Reply With Quote
Old 02-26-2020, 04:50 PM   #2
Seemedia
Senior Member
 
Join Date: Oct 2013
Location: Poland
Posts: 872
Default

Put the rendered clip to timeline again and see if the value of vectroscope are changed.
__________________
Pawel Chyrowski

Edius 9 Workgroup

Writer/Director. Director of Photography. Motion Picture and Sound Editor. Colorist.

https://facebook.com/chyrowski
https://www.youtube.com/c/PawelChyrowski
https://vimeo.com/pawelchyrowski
Seemedia is offline   Reply With Quote
Reply
 
Go Back   Grass Valley Forums > Editors > Editing with EDIUS
 

Bookmarks

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
Keyframing YUV Curve lauri Editing with EDIUS 1 07-06-2014 11:27 AM
yuv curve and keys sucdejan Editing with EDIUS 3 04-23-2012 01:29 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are Off
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 06:56 AM.


Copyright 2014 Belden Inc. All rights reserved.