Grass Valley Forums Facebook   Twitter   YouTube  

Go Back   Grass Valley Forums > Editors > EDIUS: Compatible Hardware and Accessories

Reply
 
Thread Tools Display Modes
Old 11-15-2017, 12:37 PM   #1
advisiontv
Member
 
Join Date: Dec 2007
Location: Kent, UK
Posts: 93
Default Behringer X-Touch

I have just bought a Behringer X-Touch for audio mixing with Adobe Audition, and wondered if it would work in Edius as it has all the presets for the Behringer BCF2000 which is a similar unit. However, when it tries to load the presets, Edius just crashes.
I've even tried it without the unit connected and it crashes! Anyone else had this?
__________________
Matt, AdVision TV Ltd

Main System: Edius WG 9.40 - Storm 3G, Intel Core i7-3930 Sandy Bridge 6-Core @ 3.2Ghz, Gigabyte GA-X79-UP4 Intel X79, 4GB DDR3 1600Mhz Ram, 12TB RAID Array, GT650 1024MB GDDR5 Gfx Card

Laptop System: Edius WG 9.40 - Intel Core i9-9900K @ 3.6Ghz, 64GB RAM
advisiontv is offline   Reply With Quote
Old 12-22-2017, 01:21 PM   #2
Rosco
Junior Member
 
Join Date: Dec 2017
Location: UK
Posts: 4
Default

Hi,

I would like to know what control faders are compatible with Edius too.

I can be editing with 7-12 audio tracks, sometime up to 20 and would prefer a piece of hardware as adjusting with a mouse is slow.

Thanks
Rosco is offline   Reply With Quote
Old 12-22-2017, 02:50 PM   #3
John Hooper
Senior Member
 
Join Date: Mar 2010
Location: UK
Posts: 2,122
Default

Fairlight was supposed to be making hardware compatible with Edius.

Not sure if that is still the case. It was expensive.

http://www.content-technology.com/po...uction/?p=1277
__________________
Edius 8.53WG, Vistitle 2.8, Windows 10 x64 Pro Fall Update, Asus Z87 Pro, Intel i7-4770K, 16 GB 1600 Corsair Vengence LP RAM, Samsung 840 Pro SSD 256GB, WD Black 2TB media drive, Intel HD 4600 GPU, MSI GTX660 2GB VGA, Coolermaster Silencio 652 case, Noctua NH-U12S CPU cooler, Cakewalk UA-25EX USB audio interface, Cakewalk MA-15D monitor speakers, BM Intensity Pro 4K, PlextorPX-LB950SA BD writer, Dell U2410 Monitor
John Hooper is offline   Reply With Quote
Old 12-22-2017, 07:54 PM   #4
Rosco
Junior Member
 
Join Date: Dec 2017
Location: UK
Posts: 4
Default

Hi John,

Just found the PYXIS.Mix - it is very expensive and only five faders. I am sure it is impressive but just too expensive. Comes in at around 2600.00

Anything similar to the Behringer BCF200 but smaller and neater.

Can any DAW be connected or does Edius only allow Behringer and Fairlight.

Thanks for your assistance.

Cheers

Ross
Rosco is offline   Reply With Quote
Old 12-23-2017, 08:36 PM   #5
Liverpool TV
Senior Member
 
Join Date: Nov 2013
Location: Liverpool, England.
Posts: 2,841
Default

Quote:
Originally Posted by Rosco View Post
Hi John,

Just found the PYXIS.Mix - it is very expensive and only five faders. I am sure it is impressive but just too expensive. Comes in at around 2600.00

Anything similar to the Behringer BCF200 but smaller and neater.

Can any DAW be connected or does Edius only allow Behringer and Fairlight.

Thanks for your assistance.

Cheers

Ross
Hi Ross & Matthew.

Edius only has limited support for certain controllers, there should be a list somewhere on the GV site, or maybe try a forum search just in case.

If anyone has an unsupported controller it's likely they already have a DAW of some description, which would be the usual purchase reason for a controller. For anything more than basic audio post on Edius, it's probably best to export the Edius audio and do the mix in a DAW, with full support for a controller. I know this is far from ideal, but it's a workaround that may work better than struggling in Edius.

Unfortunately, Edius doesn't have any learn or assign functions and doesn't have the typical communication options or standards/protocols that most DAWs and some NLEs have.

Cheers,
Dave.
__________________
"There's only one thing more powerful than knowledge. The free sharing of it"

If you don't know the difference between Azimuth and Asimov, then either your tapes sound bad and your Robot is very dangerous. Kill all humans...... Or your tape deck won't harm a human, and your Robot's tracking and stereo imagining is spot on.

Is your Robot three laws safe?
Liverpool TV is offline   Reply With Quote
Old 12-24-2017, 08:09 PM   #6
JohnnyD
Senior Member
 
Join Date: Aug 2007
Location: Los Angeles CA
Posts: 707
Default

I still have a BFC2000 console that works great for Edius, but I'll probably sell it, as I'm mixing audio in Resovle with Fairlight. No contest. And decades old Fairlight consoles will work with Resolve/Fairlight. There are used Fairlight consoles out there.

Nothing wrong with a 8 track BFC2000 motorized console with Edius. But if you're a serious audio mixer that needs 8 to 32 or more tracks, you Need to go to Reslove/Fairlight.
__________________
Edius7, 4790K, 16G, Win7, GTX970ti MatroxLE
2nd Sys.,Edius5.51, 2700K, 16G, GTX1060, Win7
Atari 400
JohnFellersProd
JohnnyD is offline   Reply With Quote
Old 01-16-2018, 08:51 PM   #7
Rosco
Junior Member
 
Join Date: Dec 2017
Location: UK
Posts: 4
Default

HI john,

Been busy away. Is the BCF easy to setup and get working. Just looking for a simple adder to use with my edius.

Thanks Ross
Rosco is offline   Reply With Quote
Old 01-17-2018, 09:00 AM   #8
John Lewis
Senior Member
 
John Lewis's Avatar
 
Join Date: May 2007
Location: Isle of Anglesey, North Wales UK
Posts: 2,886
Default

I use a bcf2000 and its very easy to set up
I posted setup on the forum that were supplied to me by AJL
It also works with Adobe and Vegas
__________________
System Asus WS Z390 Pro MB, CPU i9 9900K, 32gb 3000mhz Ram, EVGA GTX1070TI, BM IP4K
Plugins Vistitle 2.8, TP6, NB TFX5
Monitors Samsung 32inch tv as main 1 LG M2350D,1 D2343 1 DM2350D as output to (3D) IP4K, PXW X70
John Lewis is offline   Reply With Quote
Reply
 
Go Back   Grass Valley Forums > Editors > EDIUS: Compatible Hardware and Accessories
 

Bookmarks

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
Behringer BCF 2000 John Hooper EDIUS: Compatible Hardware and Accessories 3 02-08-2011 08:20 PM
? Behringer BCF2000 AndyW69 Editing with EDIUS 5 05-04-2009 07:50 PM
HELP - Behringer 2000 ! ! ! ! AJL14 EDIUS: Compatible Hardware and Accessories 14 01-27-2009 05:36 PM
Behringer HELP ! ! ! AJL14 Editing with EDIUS 14 07-26-2008 06:24 PM
Edius 4.5 and Behringer Faderbox? Zorro Editing with EDIUS 3 06-07-2007 06:06 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are Off
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 02:19 AM.


Copyright 2014 Belden Inc. All rights reserved.