Grass Valley Forums Facebook   Twitter   YouTube  

Go Back   Grass Valley Forums > Editors > EDIUS: Compatible Hardware and Accessories

Reply
 
Thread Tools Display Modes
Old 10-11-2012, 11:34 PM   #1
Primal
Member
 
Join Date: Jun 2008
Location: Qatar
Posts: 45
Default Advice needed building a PC

My beloved edius community please enlighten me with your knowledge.

It's time for a new editing machine and all this technical stuff bring me terrible headache i just want something that will work. So i thought this might be the best place to ask for some recommendations.

My budget is approximately 2000euro(2500$) i wouldn't mind spending some more if it's necessary.

So i'm looking for best value for money a stable PC configuration that can max out the performance of edius editing footage from DSLRs and a blackmagic camera soon.
Primal is offline   Reply With Quote
Old 10-12-2012, 10:03 AM   #2
IngweSA
Senior Member
 
Join Date: Dec 2011
Location: South Africa
Posts: 109
Default

Here is my advice do a bit a research, even though Edius does not need the same requirements as Adobe it is a good starting point this is due to the high hardware spec to run a system well.
Have a look at this post on GVforum http://forum.grassvalley.com/forum/s...ad.php?t=28016
http://ppbm5.com/DB-PPBM5.php
http://ppbm6.com/Background.html

Have a look at the specs and MB used cpu's etc take the most common setup , then copy the spec and take it to your IT company that builds your PC , ask them for a Quotation on the system ., once you have this quotation ,repost it in this thread and us GVusers will give you advise.
Hope this helps
IngweSA is offline   Reply With Quote
Old 10-12-2012, 08:35 PM   #3
Primal
Member
 
Join Date: Jun 2008
Location: Qatar
Posts: 45
Default

hm i was looking for the easy way around something like here is my money this are my needs what's the best i can afford to get my work done.
Primal is offline   Reply With Quote
Reply
 
Go Back   Grass Valley Forums > Editors > EDIUS: Compatible Hardware and Accessories
 

Bookmarks

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
Building a PC for EDIUS Dom D EDIUS: Compatible Hardware and Accessories 39 08-01-2011 02:12 PM
Building New Edius PC - Can Use Some Config Help. vmstudios EDIUS: Compatible Hardware and Accessories 13 12-02-2010 02:26 PM
Advice on using TMPro needed MT02MHT Editing with EDIUS 7 11-22-2008 02:08 PM
Building new PC?? cmvideo Editing with EDIUS 1 10-26-2008 09:47 AM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are Off
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 09:44 AM.


Copyright 2014 Belden Inc. All rights reserved.