Audio db output display

dillydally · 09-03-2019, 03:41 PM

Version 9.40.5106
When lowering the audio dragging the rubber band I am not seeing the incremental db changes when moving. It only shows up when hovering over it.
Is this the norm? Previous versions displayed ok.

spurfilm · 09-03-2019, 04:56 PM

I agree. The display was extremely helpful.

antonsvideo · 09-04-2019, 12:45 AM

I see the changes just fine in the EDIUS status bar, bottom left of timeline

where did you see it in previous versions?

spurfilm · 09-04-2019, 07:22 AM

Anton, at present it is awkward to keep you eye on both what you are doing on the track and also the status bar data at the same time. I seem to remember that in Edius 7 (as here) when you dragged the track or a node up or down, the changing db/pan data was displayed at the cursor. Not at the status bar, at bottom left. Maybe I am wrong? Can an Edius 7 user confirm what actually happens? Anyhow, it would certainly help to have the data continuously displayed at the cursor while making the adjustment with the mouse. That is my point. If my memory is at fault, and the data has never been displayed this way, then perhaps this feature could be arranged in an update? As dillydally suggests, it would be very helpful.

David Clarke · 09-04-2019, 10:10 AM

I assign a keyboard shortcut to "move rubber band point" so I can click on the point, click my keyboard shortcut and enter an exact figure.

spurfilm · 09-04-2019, 10:36 AM

David, yes. That is what I do now, but without the shortcut. I will follow your example. Thanks.

dillydally · 09-04-2019, 11:25 AM

Yes , I just observed it in the status bar bottom left. Thanks for the tips

Ron Evans · 09-04-2019, 02:04 PM

For EDIUS 7 and EDIUS 8 the db value appears at the cursor on the the rubber band. I use that to get close then right click and "move" to an absolute value when needed.

spurfilm · 09-04-2019, 05:27 PM

Quote:

For EDIUS 7 and EDIUS 8 the db value appears at the cursor on the the rubber band.

But does it remain there at the cursor while you are moving, to show the updated data as you move?

spurfilm · 09-04-2019, 05:31 PM

Quote:

For EDIUS 7 and EDIUS 8 the db value appears at the cursor on the the rubber band.

But does it remain there at the cursor while you are moving, to show the updated data as you move? In fact I can answer this question myself, since I have v8 still installed on my laptop. The answer is, yes, it does. But now in EDIUS v9 it does not. So something happened. Can we have that feature back again in v9, please?

09-03-2019, 03:41 PM	#1
dillydally Junior Member Join Date: Jun 2008 Location: England Posts: 22	Audio db output display Version 9.40.5106 When lowering the audio dragging the rubber band I am not seeing the incremental db changes when moving. It only shows up when hovering over it. Is this the norm? Previous versions displayed ok.

09-03-2019, 04:56 PM	#2
spurfilm Senior Member Join Date: Oct 2008 Location: Beaconsfield, UK Posts: 521	I agree. The display was extremely helpful. __________________ Rick SPURFILM EDIUS WG 9.51.5532 Tower > Win10 Pro 64-bit on 512GB Samsung 850 Pro SSD, Nanoxia Deep Silence Case, Asus X99-S Mobo, Intel i7-5820K Haswell-E @ 3.30GHz O/C to 4GHz, 32GB Crucial DDR4 @ 2133MHz, NVIDIA GeForce 980 Ti 6GB + dual 1920x1080 monitors, BM Intensity Pro 4K + 3840x2160 monitor, LG Blu-Ray writer, Storage: 16TB WD RED RAID0. EDIUS WG 9.51.5532 Field Laptop > Acer P645-M, 14" 1920x1080, 256GB SSD, Win7 Pro 64-bit, Intel dual-core i7-4500U Haswell @ 1.8GHz, 8GB DDR3.

09-04-2019, 12:45 AM	#3
antonsvideo Senior Member Join Date: May 2007 Location: Sydney Posts: 22,354	I see the changes just fine in the EDIUS status bar, bottom left of timeline where did you see it in previous versions? __________________ Anton Strauss Antons Video Productions - Sydney EDIUS 9 WG with Matrox MXO2, Gigabyte X299 UD4 Pro, Intel Core i9 9960X 16 Core, 32 Threads @ 4.3Ghz, Corsair Water Cooling, Gigabyte RTX-2070 Super 3X 8GB Video Card, Samsung 860 Pro 512GB SSD for System, 8TB Samsung Raid0 SSD for Video, 2 Pioneer BDR-209 Blu-ray/DVD burners, Hotswap Bay for 3.5" Sata and 2.5" SSD, Phanteks Enthoo Pro XL Tower, Corsair 32GB DDR4 Ram, Win10 Pro

09-04-2019, 07:22 AM	#4
spurfilm Senior Member Join Date: Oct 2008 Location: Beaconsfield, UK Posts: 521	Anton, at present it is awkward to keep you eye on both what you are doing on the track and also the status bar data at the same time. I seem to remember that in Edius 7 (as here) when you dragged the track or a node up or down, the changing db/pan data was displayed at the cursor. Not at the status bar, at bottom left. Maybe I am wrong? Can an Edius 7 user confirm what actually happens? Anyhow, it would certainly help to have the data continuously displayed at the cursor while making the adjustment with the mouse. That is my point. If my memory is at fault, and the data has never been displayed this way, then perhaps this feature could be arranged in an update? As dillydally suggests, it would be very helpful. __________________ Rick SPURFILM EDIUS WG 9.51.5532 Tower > Win10 Pro 64-bit on 512GB Samsung 850 Pro SSD, Nanoxia Deep Silence Case, Asus X99-S Mobo, Intel i7-5820K Haswell-E @ 3.30GHz O/C to 4GHz, 32GB Crucial DDR4 @ 2133MHz, NVIDIA GeForce 980 Ti 6GB + dual 1920x1080 monitors, BM Intensity Pro 4K + 3840x2160 monitor, LG Blu-Ray writer, Storage: 16TB WD RED RAID0. EDIUS WG 9.51.5532 Field Laptop > Acer P645-M, 14" 1920x1080, 256GB SSD, Win7 Pro 64-bit, Intel dual-core i7-4500U Haswell @ 1.8GHz, 8GB DDR3.

09-04-2019, 10:36 AM	#6
spurfilm Senior Member Join Date: Oct 2008 Location: Beaconsfield, UK Posts: 521	David, yes. That is what I do now, but without the shortcut. I will follow your example. Thanks. __________________ Rick SPURFILM EDIUS WG 9.51.5532 Tower > Win10 Pro 64-bit on 512GB Samsung 850 Pro SSD, Nanoxia Deep Silence Case, Asus X99-S Mobo, Intel i7-5820K Haswell-E @ 3.30GHz O/C to 4GHz, 32GB Crucial DDR4 @ 2133MHz, NVIDIA GeForce 980 Ti 6GB + dual 1920x1080 monitors, BM Intensity Pro 4K + 3840x2160 monitor, LG Blu-Ray writer, Storage: 16TB WD RED RAID0. EDIUS WG 9.51.5532 Field Laptop > Acer P645-M, 14" 1920x1080, 256GB SSD, Win7 Pro 64-bit, Intel dual-core i7-4500U Haswell @ 1.8GHz, 8GB DDR3.

09-04-2019, 11:25 AM	#7
dillydally Junior Member Join Date: Jun 2008 Location: England Posts: 22	Yes , I just observed it in the status bar bottom left. Thanks for the tips

09-04-2019, 02:04 PM	#8
Ron Evans Senior Member Join Date: May 2007 Location: Ottawa Posts: 4,060	For EDIUS 7 and EDIUS 8 the db value appears at the cursor on the the rubber band. I use that to get close then right click and "move" to an absolute value when needed. __________________ Ron Evans Threadripper 1920 stock clock 3.7, Gigabyte Designare X399 MB, 32G G.Skill 3200CL14, 500G M.2 SATA OS, 500G EVO 850 temp. 1T EVO 850 render, 6T Source, 2 x 1T NVME, MSI 1080Ti 11G , EVGA 850 G2, LG BLuray Burner, BM IP4K, WIN10 Pro ASUS PB328 monitor, BenQ BL2711U 4K preview monitor, EDIUS 9.5 WG, Vegas 17, Resolve Studio 16 Cameras: GH5S, GH5, FDR-AX100, FDR-AX53, DJI OSMO Pocket, Atomos Ninja V x 2

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Change db range on Audio meter?	zvit	Editing with EDIUS	27	01-27-2012 06:23 PM
Output cannot display on monitor TV	aminmukhtar	Editing with EDIUS	10	01-15-2012 06:34 AM
Audio Rubber Band db Missing	JimG	Editing with EDIUS	6	03-30-2010 11:12 AM
Display timecode on dvd output	skier-hughes	Editing with EDIUS	2	07-03-2007 09:55 PM