Grass Valley Forums Facebook   Twitter   YouTube  

Go Back   Grass Valley Forums > Replay Control Systems > Working with K2 Dyno

Reply
 
Thread Tools Display Modes
Old 08-17-2012, 05:07 PM   #1
GrassValley_OB
Grass Valley
 
GrassValley_OB's Avatar
 
Join Date: Aug 2012
Location: Hillsboro, Oregon USA
Posts: 28
Default Adding a controller to a Summit - short cut

Instead of going through the steps to build the host table (the proper and stable way to do it) you might want to simply or quickly add a controller so that you can get on with running the system.

The physical connection between the Dyno and Summit should be GB1 on the Dyno and on the back of the Summit there are 4 GB connection ports stacked 2 over 2, connection should be lower left.

On the Summit side, in the lower right corner, find the terminal connection icons (looks like little computer terminals) click on the one that says "Control Connection #1." This opens a window of that status and your next selection is to click on "Properties."

Click once on "Internet Protocol (TCP/IP)" and then "Properties" below it. This opens the TCP window and allows you to obtain or use an IP address.

The address in the window is what you want to type into the Dyno window under Add Server.

Another method is to utilize the computer name. (see thread: Add Server to Dyno - Computer Name)
GrassValley_OB is offline   Reply With Quote
Reply
 
Go Back   Grass Valley Forums > Replay Control Systems > Working with K2 Dyno
 

Bookmarks

Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
Adding multiple solid color clips to timeline cut points DMS Video Editing with EDIUS 5 01-19-2009 11:14 PM
Short cut key for clip color? dwchd Editing with EDIUS 2 08-21-2007 05:03 PM
Short cut on OSD richvideo Editing with EDIUS 4 08-14-2007 12:20 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are Off
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 01:20 PM.


Copyright 2014 Belden Inc. All rights reserved.