Grass Valley Forums Facebook   Twitter   YouTube  

Go Back   Grass Valley Forums > Converters > ADVC

Reply
 
Thread Tools Display Modes
Old 07-31-2007, 08:03 PM   #1
chungkuo
Guest
 
Posts: n/a
Default ADVC-500 and Edius Pro print-to-tape problems

We've got a couple of Edius pro stations using ADVC-500 breakout boxes in a news environment. The ADVC-500 is connected to an older DVCPRO deck via component video and XLR audio cables. The 500 is in turn connected to the workstation via Firewire.

We can capture into Edius in AVI format without problems. When we attempt to print to tape, however, we get an 'unable to phase lock' error and the export stops. When the export confirmation screen comes up, it lists Firewire as the device control. This isn't going to work, since our decks are controlled via RS 422. There appears to be no way to switch it in any of the Edius settings.

Also, we have tried to simply do a playout from the timeline and start the recording on the deck manually, but no video is passed from the workstation to the deck in this case. The ADVC-500 does, however, switch from Analog->DV mode to DV->Analog mode.

Help?
  Reply With Quote
Old 07-31-2007, 08:17 PM   #2
GrassValley_KH
Mr Sparkle
 
Join Date: Apr 2007
Location: San Jose, CA
Posts: 3,748
Default

Brandon might be a bit more knowledgeable in this case, but as I understand it:

1) If you're running just EDIUS software, or EDIUS NX, you won't get RS-422 control - you need EDIUS SP as a minimum (which takes the place of an ADVC500 anyway).

2) ADVC500 doesn't support AV/C-RS-422 instruction conversion - this is a feature we added in the ADVC700.

Sounds like you need an ADVC700. Btw, none of our ADVCs handle DVCPRO 25/50 (DV25 only) - but I assume you already know this..
GrassValley_KH is offline   Reply With Quote
Old 07-31-2007, 11:52 PM   #3
GrassValley_BH
Demystifier/Analogizer
 
Join Date: Apr 2007
Location: Hillsboro, OR
Posts: 5,785
Default

Exact on both accounts.

Newer DVCPRO decks support DV25 output, but usually not input, but sounds like you're connected analog anyway to get around those troubles.
GrassValley_BH is offline   Reply With Quote
Reply
 
Go Back   Grass Valley Forums > Converters > ADVC
 

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are Off
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT +1. The time now is 01:16 PM.


Copyright 2014 Belden Inc. All rights reserved.