Grass Valley Forums Facebook   Twitter   YouTube  

Go Back   Grass Valley Forums > Editors > Editing with EDIUS

Thread Tools Display Modes
Old 09-14-2007, 03:36 PM   #1
Posts: n/a
Default ASUS P5K and Pci Express for Edius NX Express


This MB has two Pci EX1-1 (above PCI EX16-1(blue) for graphic card) so Edius NX main card in one slot and firecoder componant out board in the second one
but ...
with a 8600 GTS card with a huge passive cooler = physically too near each one !
so is the other PCI EX (4x black one on MB) can really accept the firecoder card ?
(small connector of the card in a long connector on the MB ?)
Same pins connections ?

Many thanks for your replies

Canopus Reseller
  Reply With Quote
Old 09-15-2007, 04:21 AM   #2
Senior Member
mike0130's Avatar
Join Date: May 2007
Location: Canada
Posts: 559

I use P5B Deluxe with NX Express. It has only one x1 slot and two x16. They can downgrade, so I use slot x1 for main board and x16 for Firecoder, it works good.
I had one problem recently... while capturing DV (!) i had a message that my destination disk too slow... (It's a RAID 0 and I made a defragmentation!)
Anyway, I think that the reason for it was BIOS, that I put a few weeks ago, I installed a previous one and a problem is gone... at least for now.
Asus P8P67, Intel i7 2600K working at 4.50 Ghz, 16Gb Kingston RAM, Windows 7 64bit, 500Gb system drive, 320Gb Data drive and 1TB RAID-0 for AV, Edius NX Express, EVGA nVidia GTX 570 2.5CB DDR5, 750w ALTEC power and some creativity...
mike0130 is offline   Reply With Quote
Go Back   Grass Valley Forums > Editors > Editing with EDIUS


Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
EDIUS NX Express system build PCI express slot requirements Please. Imagine Video Editing with EDIUS 4 11-09-2007 10:58 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are Off
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT +1. The time now is 09:37 PM.

Copyright 2014 Belden Inc. All rights reserved.