Grass Valley Forums Facebook   Twitter   YouTube  

Go Back   Grass Valley Forums > Converters > ADVC

Thread Tools Display Modes
Old 12-05-2007, 07:50 PM   #1
Posts: n/a
Default Advc700

We have several of these units in our editing department at our station. We have all sort of lock up issues. When you take the VTR out of remote to manual shuttle it will freeze the ADVC700. If we use the Eduis software ,they seem to work ok.But Adobe Premier Pro 2.0 it may are may not work.
Can any one help us?

Steve Magee
  Reply With Quote
Old 12-05-2007, 08:59 PM   #2
Join Date: Apr 2007
Location: Hillsboro, OR
Posts: 5,785

If it's an immediate/critical issue, then you should give our technical support department a call, but if not, I have a couple of questions...
  1. You are using the ADVC in Analog-to-Digital mode, correct?
  2. When you say the ADVC freezes when you switch the VTR out of remote mode, does the ADVC resume when you put the VTR back into remote mode?
When you switch the VTR out of remote mode, it's probably no longer sending timecode and status information via RS422 to the ADVC, so if the ADVC is translating RS422 timecode to DV timecode and status information to DV status information, essentially the NLE thinks the DV deck has stopped.
GrassValley_BH is offline   Reply With Quote
Go Back   Grass Valley Forums > Converters > ADVC


Thread Tools
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
ADVC700 Control issue scholl ADVC 0 11-19-2008 04:52 PM
Print to tape using ADVC700 (frame accurate) h3170ra ADVC 1 09-29-2008 07:03 PM
ADVC700 and Latitude D820 problems dvallez ADVC 1 09-24-2007 08:37 PM

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are Off
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT +1. The time now is 02:14 PM.

Copyright 2014 Belden Inc. All rights reserved.