View Single Post
Old 07-03-2008, 10:08 PM   #7
TrackRanger
Senior Member
 
TrackRanger's Avatar
 
Join Date: Feb 2008
Location: Melbourne, Australia
Posts: 215
Default

Quote:
Originally Posted by GrassValley_KH View Post
(It helps when I actually look at the graphics board first)

Ok, time to test something. Have you got a DVI-to-HDMI cable or adapter?

This is what I'd like to know:

- Run a DVI-to-HDMI cable from one of the DVI ports (or use an adapter and your existing HDMI cable) to the Pegasus HDMI input
- Run the other DVI output to a monitor
- Configure ForceWare to Cloneview, and make the (now-detected) HDRECS board the primary display (for overlay purposes)
- Set your resolution accordingly (e.g. 1280x1024)
- Instruct HQ Recorder to capture DVI input at 1280x1024

Post your results!
Hmmm
No sure I follow.
Have DVI-DVI, DVI-HDMI, HDMI-HDMI cables etc.
The first step is to connect the cable from DVI to the Pegasus HDMI input. Can do.
The last step is to capture from the DVI input at 1280x1024

1: If the input is connected to HDMI how can it capture from DVI?
2: HDMI does not have a 1280x1024 option
3: Can I use NVIDIA control panel or Windows Display Properties Settings to set the primary display? I don't think ForceWare supports Gigabyte GeoForce 9800 GX2 graphics card

TIA
__________________
Intel Quad Core Extreme 3GHz/12M, 4Gb RAM, 2Tb Hot-swap (ARAID), NVIDIA GeoForce 8800 GTS, Edius Broadcast 4.61 / Edius 5.5, Procoder 3, DVDit Pro HD, Sonicfire Pro 5, Mercalli, Vitascene, Adorage. TwinPact 100, Pegasus, TMPro. VirtualDub
TrackRanger is offline   Reply With Quote