Thread: FireCoder Blu
View Single Post
Old 12-28-2013, 07:32 PM   #19
John Lewis
Senior Member
 
John Lewis's Avatar
 
Join Date: May 2007
Location: Isle of Anglesey, North Wales UK
Posts: 2,948
Default

From memory you have to install the Firecoder Software but you don't have to use it, although it will work as standalone
Once Installed you will have a check box to enable hardware when exporting to H264. TMPGenc will also use its capabilities

I still have mine in a PC with 6.08 but now never need to use it because my main PCs are either 6.5 or 7 and have Quicksync

If you have original disk and registered it you will have access to updated software. There were a total of 4 updates but a search on the forum will tell you which was the best update (the last update was V1.11) as there were problems with some updates

There were also Disc Creator templates which if using standalone were needed as the Edius versions were not compatible. These are also available when registered
__________________
System Asus WS Z390 Pro MB, CPU i9 9900K, 32gb 3000mhz Ram, EVGA GTX1070TI, BM IP4K Win 10
Plugins Vistitle 2.8, TP6, NB TFX5
Monitors Samsung 32inch tv as main 1 LG M2350D,1 D2343 1 DM2350D as output to (3D) IP4K, PXW X70
John Lewis is offline   Reply With Quote