View Single Post
Old 08-27-2009, 08:31 AM   #5
Bluetongue
Senior Member
 
Bluetongue's Avatar
 
Join Date: May 2007
Location: Adelaide South Australia
Posts: 2,197
Default

For a surefire way, almost as good as using a FirecoderBlue card with "SuperResolution" selected is a follows
Export your SD footage in Canopus Losless

Using VirtualDub with the following settings
Resize filter
New Size "Absolute Pixel" 1440x1080 or 1920x1080
Aspect Ratio Disabled
Filter Mode Lanczos3
Interlaced Selected, if original is interlaced

Cropping
If your footage is 4x3 set Y1 and Y2 offset to 18

Sharpen Filter = 32

Smoother Filter set to 18
and enable noise prefilter

Select Video on the Menu, Select compression and select Canopus Losless

Select "Save as AVI" and set destination and file name

Bring the resultant file into Edius, select properties, make sure Lower Field first is selected and correct Aspect ratio (16x9)
NOTE The Canopus Lossless codec gives better results than HQ, Less Staircasing
Regards Barry
__________________
Win 10HP, EDIUS WG9.4, HD Spark, Boris RED 5, VMW6, Authorworks 6, Bluff Titler, VisTitler 2.8, NEAT 3/4, Mercalli 2/4, Vitascene, Izotope RX6 Plugin, NewBlue, Trend Micro AV
GB GA-X58A-UD3R MB, i7 990X@4G, 12G 1600mhz Mem, Samsung EVO-250G SSD, 3x2T RAID, GTX 970W OC, 2x24 inch LG Monitors
Canon XH-A1/ Canon HF-G30, GoPro Hero3 Black, Edit @1920 50p HQ preset

https://vimeo.com/user2157719/videos
Laptop ASUS G752VT-GC060T Win 10HP, Edius WG8.53 Samsung M2 SSD 256G+1Tb HD,

Last edited by Bluetongue; 08-27-2009 at 10:00 AM.
Bluetongue is offline   Reply With Quote