Grass Valley Forums

Grass Valley Forums (http://forum.grassvalley.com/forum/index.php)
-   EDIUS: Compatible Third Party Products (http://forum.grassvalley.com/forum/forumdisplay.php?f=36)
-   -   Edius 9 & Neat video 4 - No Longer Top of Stack? (http://forum.grassvalley.com/forum/showthread.php?t=44004)

Bassman 11-12-2019 11:08 PM

Edius 9 & Neat video 4 - No Longer Top of Stack?
 
Hello,

Is it me or does Neat Video v4 no longer need to be at the top of the filter stack to get proper color? Could I get official word on this?

Yesterday I was applying the filter and realized the image looked consistent weather or not the filter was on the bottom of the stack or top.

Thanks and good news if this is true.

Ron Evans 11-13-2019 01:08 AM

I think Neat V4 and V5 need to be at the top of stack above layouter. That is the instruction on the Neat site which I have always followed. https://www.neatvideo.com/support/qu...-guides/nv5/ed

Bassman 11-13-2019 06:27 AM

Give it a shot and see if the color changes on your system. In Edius 8 I would get a large hue shift. In Edius 9 the color seems to be unchanged if I alter the order. I will check it again as I just noticed it yesterday.

David Clarke 11-13-2019 09:11 AM

It still needs to be at the top before the layouter. I have been using it on a lot of 4x3 clips on a 16x9 timeline and if it is after the layouter they are no longer scaled properly.

GrassValley_PS 11-13-2019 07:25 PM

Best practice is to still put it on top. As Tim observed there are some situations (clip types and function) that it will not make a difference. I just had some of those. But it is better to be safe.

Bassman 11-13-2019 07:59 PM

Thanks Pat. I thought the same thing - better to be safe and leave it on top. I am using Panasonic AVC-Ultra clips and it seems to be working throughout the stack.

Pat, BTW, I have a thread in the Lounge area regarding hardware effects on the speed of Edius. Any way you could weigh in with any insight? Thanks.


All times are GMT +1. The time now is 01:03 AM.


Copyright 2014 Belden Inc. All rights reserved.