Grass Valley Forums

Grass Valley Forums (http://forum.grassvalley.com/forum/index.php)
-   EDIUS: Compatible Third Party Products (http://forum.grassvalley.com/forum/forumdisplay.php?f=36)
-   -   MPEG cutter/joiner for Edius files?? (http://forum.grassvalley.com/forum/showthread.php?t=13624)

Raja 10-27-2009 04:40 PM

MPEG cutter/joiner for Edius files??
 
Didn't know where to post this.
Can anyone recommend a good mpeg cutter/joiner application for Edius encoded mpeg files (without the need to re-encode)?
I've always used the Canopus MPEGcraft program but it doesn't support mpeg files with AC3 audio.

I've googled it but would like any recommendations from any users here.

Cheers

mattie 10-27-2009 08:11 PM

www.womble.com seems a popular one too

xtz_ 10-28-2009 08:31 AM

Have you tryed Edius with segmentencode on export?

Raja 10-28-2009 07:42 PM

Quote:

Originally Posted by xtz_ (Post 92708)
Have you tryed Edius with segmentencode on export?

I think I tried it once and it took time. I will try it again.

mattie 10-28-2009 07:59 PM

for this to work - the frame size and bit rates must be the same as the original - if the bit rate is VBR then the upper rate is the one that needs to match the original clips

Raja 10-28-2009 10:09 PM

Just tried it with Edius. Doesn't work. A 1hr 40min clip with another clip (same bitrate for clips and while export), was estimating 15mins. Would be around 3-4mins with an MPEG cutter program.

David Clarke 10-29-2009 01:00 PM

Did you have the render codec for the timeline set to MPEG as well as choosing MPEG as the export format and ticking "segment encode". Last time I tried it I had to do that as well.

zb21 10-30-2009 05:54 PM

VideoReDo
 
Try this:

http://www.videoredo.com/en/index.htm

It works for me, although it is not free,
ZB

John Lewis 10-30-2009 07:27 PM

Mpeg Cutter etc used to be in the start menu of my old machine
can someone remind me which Canopus Software they came from
I have Lets create DVD (when installed shows up as Mpegcraft2) butt specific parts dont show up as standalone


All times are GMT +1. The time now is 06:25 AM.


Copyright 2014 Belden Inc. All rights reserved.