Announcement

Collapse
No announcement yet.

HDSPARK crashed wih blue screen on Z590 board

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • HDSPARK crashed wih blue screen on Z590 board

    When I click on HDSPARK on preview device, windows crashed with blue screen. Please help!
    My new built PC configuration:-
    Edius Workgroup 8
    CPU: i5-10400
    Motherboard: Asrock Z590 Extreme WiFi 6E
    Memory Ram : Adata XPG Spectrix D60G RGB (2 x 8GB)
    Display card: No. With on board HDMI
    System Disk: SSD 512G Adata M.2 XPG SX8200 Pro 512GB
    Data Disk: SSD 1T Adata M.2 XPG SX8200 Pro 1T
    System: Windows 10 Enterprise 21H2 ( 11)

  • #2
    I am not sure if new PC can handle the old Spark card, try it in a different PCIe slot and see if that works, you may have placed it in a slot that is shared with M.2 etc
    Anton Strauss
    Antons Video Productions - Sydney

    EDIUS X WG with BM Mini Monitor 4k and BM Mini Recorder, Gigabyte X299 UD4 Pro, Intel Core i9 9960X 16 Core, 32 Threads @ 4.3Ghz, Corsair Water Cooling, Gigabyte RTX-2070 Super 3X 8GB Video Card, Samsung 860 Pro 512GB SSD for System, 8TB Samsung Raid0 SSD for Video, 2 Pioneer BDR-209 Blu-ray/DVD burners, Hotswap Bay for 3.5" Sata and 2.5" SSD, Phanteks Enthoo Pro XL Tower, Corsair 32GB DDR4 Ram, Win10 Pro

    Comment


    • #3
      Thanks Antons. I'll try what you suggest.

      Comment


      • #4
        Bad news I try all the other PCIE slots, none of them works. Either immediately blue screen or hang up.

        Comment


        • #5
          Will neither one of the two bottom PCI-E 1X slots work? You loose one of the PCI-E 1X slots because of the GPU.
          Are the drivers being recognized? Does the HD Spark show up in the device manager? It's been a while since I used Edius 8,
          but did you run the Hardware setup tool? It should be in the Edius folder.
          Jerry
          Six Gill DV
          www.sgdvtutorials.com
          If you own the Tutorials and you need help, PM me.

          Vistitle YouTube Channel
          https://www.youtube.com/channel/UCMVlxC8Am4qFbkXJRoPAnMQ/videos

          Windows 10 Pro up to v.1803 Tweaks for Edius Users
          http://sgdvtutorials.com/WIN%2010%20...%20V.2.0.0.pdf


          Main System:: Azrock Z97 Extreme 6, [email protected], 32gb ram, NZXT Z63, Win10 Pro 64, Samsung 850 pro, E7.5/8.5/E9 on separate SSD drives, 2TB Sabrent M.2 NVME, BM MINI MONITOR 4K, 12tb RAID 0 on backplane ,2 BD, Dual LG 27GK65S-B 144Hz monitors, GTX 1080ti SC Black.
          Second System: EditHD Ultimax-i7, X58, [email protected], Corsair H80, Win764, 24gb ram, Storm 3g, Samsung 840 Pro 256, 4tb and 6tb RAID 0 on backplane, GTX 980ti Classified, Edius 9, Apple 30", Samsung 24", dual BD.

          Comment


          • #6
            This board has 3 PCIE 1X that have been all tested. None supported. HDSpark seems installed normally. On the device manager it shows the driver version: 8.5.0.1851 and the date 2017/3/15 provided by Grass Valley K.K.
            When the HDSpark was first settle down into the slot, the card was recognized and the driver was automaticly installed. As later on crash and blue screen happened, I tried to download the driver from Edius Home. The driver was an very old one ver 1.03, so no way.

            Comment


            • #7
              I would not be surprised about the card not working in a new mobo

              get the BM Mini Monitor 4k (cheap), then you can have progressive and interlaced output up to 4k
              Anton Strauss
              Antons Video Productions - Sydney

              EDIUS X WG with BM Mini Monitor 4k and BM Mini Recorder, Gigabyte X299 UD4 Pro, Intel Core i9 9960X 16 Core, 32 Threads @ 4.3Ghz, Corsair Water Cooling, Gigabyte RTX-2070 Super 3X 8GB Video Card, Samsung 860 Pro 512GB SSD for System, 8TB Samsung Raid0 SSD for Video, 2 Pioneer BDR-209 Blu-ray/DVD burners, Hotswap Bay for 3.5" Sata and 2.5" SSD, Phanteks Enthoo Pro XL Tower, Corsair 32GB DDR4 Ram, Win10 Pro

              Comment


              • #8
                I second the Mini Monitor 4K.
                Jerry
                Six Gill DV
                www.sgdvtutorials.com
                If you own the Tutorials and you need help, PM me.

                Vistitle YouTube Channel
                https://www.youtube.com/channel/UCMVlxC8Am4qFbkXJRoPAnMQ/videos

                Windows 10 Pro up to v.1803 Tweaks for Edius Users
                http://sgdvtutorials.com/WIN%2010%20...%20V.2.0.0.pdf


                Main System:: Azrock Z97 Extreme 6, [email protected], 32gb ram, NZXT Z63, Win10 Pro 64, Samsung 850 pro, E7.5/8.5/E9 on separate SSD drives, 2TB Sabrent M.2 NVME, BM MINI MONITOR 4K, 12tb RAID 0 on backplane ,2 BD, Dual LG 27GK65S-B 144Hz monitors, GTX 1080ti SC Black.
                Second System: EditHD Ultimax-i7, X58, [email protected], Corsair H80, Win764, 24gb ram, Storm 3g, Samsung 840 Pro 256, 4tb and 6tb RAID 0 on backplane, GTX 980ti Classified, Edius 9, Apple 30", Samsung 24", dual BD.

                Comment


                • #9
                  Thanks Anton for your suggestion. Before purchasing BM min Monitor 4K, I must make sure that would work properly with Z590 board. Has anybody had such experience using it on this new kind board?

                  Comment


                  • #10
                    The card is a 6G card and is still being updated by BM. If you are concerned, send an email to black magic design support and they can answer that question. They are fairly quick with responding.

                    You should look through your mobo manual and find the voltage requirements for the pci-e 1X slots. Then compare that to the HD Spark voltage requirements which are: +12V: 0.05A, +3.3V: 0.9A
                    Last edited by Jerry; 11-25-2021, 05:31 PM.
                    Jerry
                    Six Gill DV
                    www.sgdvtutorials.com
                    If you own the Tutorials and you need help, PM me.

                    Vistitle YouTube Channel
                    https://www.youtube.com/channel/UCMVlxC8Am4qFbkXJRoPAnMQ/videos

                    Windows 10 Pro up to v.1803 Tweaks for Edius Users
                    http://sgdvtutorials.com/WIN%2010%20...%20V.2.0.0.pdf


                    Main System:: Azrock Z97 Extreme 6, [email protected], 32gb ram, NZXT Z63, Win10 Pro 64, Samsung 850 pro, E7.5/8.5/E9 on separate SSD drives, 2TB Sabrent M.2 NVME, BM MINI MONITOR 4K, 12tb RAID 0 on backplane ,2 BD, Dual LG 27GK65S-B 144Hz monitors, GTX 1080ti SC Black.
                    Second System: EditHD Ultimax-i7, X58, [email protected], Corsair H80, Win764, 24gb ram, Storm 3g, Samsung 840 Pro 256, 4tb and 6tb RAID 0 on backplane, GTX 980ti Classified, Edius 9, Apple 30", Samsung 24", dual BD.

                    Comment


                    • #11
                      Originally posted by pyfung68 View Post
                      Thanks Anton for your suggestion. Before purchasing BM min Monitor 4K, I must make sure that would work properly with Z590 board. Has anybody had such experience using it on this new kind board?
                      the BM Mini Monitor 4k card will work if placed in slot as marked in attached

                      Anton-01590.png
                      Anton Strauss
                      Antons Video Productions - Sydney

                      EDIUS X WG with BM Mini Monitor 4k and BM Mini Recorder, Gigabyte X299 UD4 Pro, Intel Core i9 9960X 16 Core, 32 Threads @ 4.3Ghz, Corsair Water Cooling, Gigabyte RTX-2070 Super 3X 8GB Video Card, Samsung 860 Pro 512GB SSD for System, 8TB Samsung Raid0 SSD for Video, 2 Pioneer BDR-209 Blu-ray/DVD burners, Hotswap Bay for 3.5" Sata and 2.5" SSD, Phanteks Enthoo Pro XL Tower, Corsair 32GB DDR4 Ram, Win10 Pro

                      Comment


                      • #12
                        The BM Mini Monitor card (HD and SD only) will work in any 1x slot
                        If you can't get one, I have one in stock
                        Anton Strauss
                        Antons Video Productions - Sydney

                        EDIUS X WG with BM Mini Monitor 4k and BM Mini Recorder, Gigabyte X299 UD4 Pro, Intel Core i9 9960X 16 Core, 32 Threads @ 4.3Ghz, Corsair Water Cooling, Gigabyte RTX-2070 Super 3X 8GB Video Card, Samsung 860 Pro 512GB SSD for System, 8TB Samsung Raid0 SSD for Video, 2 Pioneer BDR-209 Blu-ray/DVD burners, Hotswap Bay for 3.5" Sata and 2.5" SSD, Phanteks Enthoo Pro XL Tower, Corsair 32GB DDR4 Ram, Win10 Pro

                        Comment


                        • #13
                          Thanks Anton and Jerry quick response and suggestion. I think I would buy a BM min Monitor 4K after my coming two projects closed. Once again thank all of you for your great help.

                          Comment

                          Working...
                          X