Announcement

Collapse
No announcement yet.

No SPLib DLL was found in the Waterfall procedure

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • No SPLib DLL was found in the Waterfall procedure

    Interesting title ? not really when it happened yesterday to me !

    This problem has been resolved, but would just like to share it with the forum as general knowledge.

    While starting Edius 4.61, halfway loading the progress bar, the message "No SPLib DLL was found in the Waterfall procedure" and it would just exit after a minute or 2, no more Edius !

    After spending some time with google, it was clear that this is an audio related dll problem, in my case a coruption of one ore more vst plugins from tl electronics & tc audio.

    When my dvd writer died it corrupted these dll files, it seems that these vst plugins require for some sinister reason a working cd / dvd drive in the system, this actually I knew from previous system builds that when no cd / dvd drive is attached is corrupts these vst dll's, but just tells you nicely to re-install these plug ins.

    I did not use wavelab (could be any audio editor running vst's) for a couple of days so this "No SPLib DLL was found in the Waterfall procedure" message puzzled me for a few hours.

    It was neither a Edius or wavelab problem, but I think this experience (and solution) might benefit forum users in the future.

    Edius is running fine again since the repair ..................

  • #2
    Thank's for valuable tip !!!!

    I also got same problem, even if I installed Edius again, IPPS's again and struggling weeks with this error.. now resolved with corrupted NewBlue or Vistitle upgrade..
    Supermicro 2x Quad-core 5450 3GHz, intel 5000X, 12GB RAM, 12TB, Edius 6.5 HDSpark, Win8, 3x24" Samsungs, E-Mu 1616, Nvidia FX3700
    Sony Z1 & F-350, Canon 1D X, Panasonic HPX 3000 + Amphibico housing- Inspiration Vision Trimix.

    Comment


    • #3
      You're welcome :)
      Tony D.

      EDIUS WG 9.52 / MATROX MXO2 LE / WIN10 Pro WS / LENOVO P71 Workstation laptop / XEON E3-1535M v6 / nVidia QUADRO P3000 6GB / Toshiba M.2 NVMe 512GB / 2x Samsung 860 EVO 4TB / 32GB ECC RAM.

      EDIUS WG 8.53 / HDRX-E1 + HDBX-1000H / WIN10 Pro / DUAL XEON X5470 / SUPERMICRO X7DWA-N / SUPERMICRO SUPERCHASIS SC745TQ-920B / INTEL 520 SSD 240GB / WD CAVIAR BLACK 4TB (many) / 32GB ECC RAM / GTX 770 4GB / 2x MOTU 896HD.


      wavearts / neatvideo / tmpgenc / hitfilm / imaginate / affinity

      Comment


      • #4
        =)

        Thank you very much! Today, I have found the same problem. Reinstalling Edius 6.08 not helped. Fortunately then I found this topic. And remembered that today delete the program "go-pro cineform studio". Established cineform again, and Edius is working now! If not for this topic long thinking my mistake. Thank!

        Comment


        • #5
          The problem arises if you install GoPro software and then uninstall it sometime in the future. The only cure I have found to date is to reinstall the GoPro studio software.

          Take a system image before trying new software.
          Sys1: Gigabyte Z370 HD3 i7 8086K(4.3Ghz), 16Gb ram, 256Gb SSD system + 2x2Tb video drives, Graphics: nVidia 1060 (W10 Pro) E8v3 WG; Vegas Pro17; DVD Architect 5.2 GH2(hacked) Pana HC-X2000E
          Sys2 :Clevo i7 6700HQ 3.5Ghz,16Gb ram 2565Gb SSD + 1Tb (W10 Pro)
          Software: E8v3 WG; Vegas Pro17

          Comment


          • #6
            I have reinstalled GoPro and it still is not working for me. What is something else i can try?
            Best Regards,
            Brent Nelsen
            Studio 43 Productions
            ------------------------------------------------------
            System: M6600 Dell Laptop i7 quad core 2.27ghz, 8gig ram, AMD (ATI) FirePro M8900 graphics 2gig

            Comment


            • #7
              This fixed my problem

              This is what fixed my problem:

              http://gopro.com/support/articles/er...g-gopro-studio
              Best Regards,
              Brent Nelsen
              Studio 43 Productions
              ------------------------------------------------------
              System: M6600 Dell Laptop i7 quad core 2.27ghz, 8gig ram, AMD (ATI) FirePro M8900 graphics 2gig

              Comment


              • #8
                I am going to ask a stupid question
                Why would you need to install the GOPRO software?
                Edius can import or use AVCHD2HQ and there are no problems
                Edius even has a "MIRROR" filter if you accidentally filmed upside down and for got to tell the camera
                And if you are worried about the lens distortion, New Blue and Prodad have excellent filters to reclaim the clip and don't upset edius

                Perhaps I am just getting too old but I don't just add software to my system because it is free and there has been numerous reports of this problem

                Barry
                Win 10HP, EDIUS WG9.4, HD Spark, Boris RED 5, VMW6, Authorworks 6, Bluff Titler, VisTitler 2.8, NEAT 3/4, Mercalli 2/4, Vitascene, Izotope RX6 Plugin, NewBlue, Trend Micro AV
                GB GA-X58A-UD3R MB, i7 [email protected], 12G 1600mhz Mem, Samsung EVO-250G SSD, 3x2T RAID, GTX 970W OC, 2x24 inch LG Monitors
                Canon XH-A1/ Canon HF-G30, GoPro Hero3 Black, Edit @1920 50p HQ preset

                https://vimeo.com/user2157719/videos
                Laptop ASUS G752VT-GC060T Win 10HP, Edius WG8.53 Samsung M2 SSD 256G+1Tb HD,

                Comment


                • #9
                  "Why would you need to install GOPRO software"

                  In my case I was a Vegas Pro user and GOPRO provided a free 'cineform' lossless .avi codec. In earlier versions of Vegas the cineform codec was part of the package. I'm sure others will be in a similar position.
                  After switching to Edius a little housekeeping was undertaken and GOPRO was uninstalled. That's how I discovered that uninstalling GOPRO brought up the 'No SPLib Dll'' error and in my case reinstalling it cleared the problem. No doubt the removal of other software could cause a similar error.
                  Having learnt my lesson a second bootable drive and 'rebuilt' the machine. Images taken & logged at various stages of the software install.

                  Geoff
                  Sys1: Gigabyte Z370 HD3 i7 8086K(4.3Ghz), 16Gb ram, 256Gb SSD system + 2x2Tb video drives, Graphics: nVidia 1060 (W10 Pro) E8v3 WG; Vegas Pro17; DVD Architect 5.2 GH2(hacked) Pana HC-X2000E
                  Sys2 :Clevo i7 6700HQ 3.5Ghz,16Gb ram 2565Gb SSD + 1Tb (W10 Pro)
                  Software: E8v3 WG; Vegas Pro17

                  Comment


                  • #10
                    Thanks Geoff

                    That answers the question I could not understand
                    I have the same problem with others I help and it is usually programs they have downloaded and some have not even used but clog the system, that was the reason for my question, but no one listens, no one so far had given a good reason
                    Since I only use Edius I had no idea of the shortcommings others face, once i found the ultimate there was no need for the rest

                    Barry
                    Win 10HP, EDIUS WG9.4, HD Spark, Boris RED 5, VMW6, Authorworks 6, Bluff Titler, VisTitler 2.8, NEAT 3/4, Mercalli 2/4, Vitascene, Izotope RX6 Plugin, NewBlue, Trend Micro AV
                    GB GA-X58A-UD3R MB, i7 [email protected], 12G 1600mhz Mem, Samsung EVO-250G SSD, 3x2T RAID, GTX 970W OC, 2x24 inch LG Monitors
                    Canon XH-A1/ Canon HF-G30, GoPro Hero3 Black, Edit @1920 50p HQ preset

                    https://vimeo.com/user2157719/videos
                    Laptop ASUS G752VT-GC060T Win 10HP, Edius WG8.53 Samsung M2 SSD 256G+1Tb HD,

                    Comment


                    • #11
                      Here's the fix.

                      Error: 'No DLLS were Found in the Waterfall Procedure' Occurs After Installing GoPro Studio

                      In some cases after installing GoPro Studio, other applications may report an error that states: "Error at loading if ippSP library - No DLLS were Found in the Waterfall procedure".

                      If this occurs the solution is to browse to: C:\Windows\SysWOW64 and then remove these files:

                      ippcore-6.1
                      ippj-6.1
                      ippjw7-6 .. 1
                      IPPS-6.1
                      ippvc-6.1

                      Comment


                      • #12
                        Worked! Removed the files as recommended above. Thanks.

                        Comment


                        • #13
                          fix with same problem

                          I also had the same problem after installing gopro 4 studio.
                          Then found this solution and it worked for me.
                          Browse to C/windows/sysWOW64 and then remove these files

                          ippcore-6.1
                          ippj-6.1
                          ippjw7.6..1
                          IPPS-6.1
                          ippvc6.1

                          Comment


                          • #14
                            Thanks

                            Thanks
                            The last answer - removing the files.... worked !

                            Thanks again
                            Last edited by vasp300; 05-08-2015, 04:35 PM.

                            Comment

                            Working...
                            X