Edius Dv Storm 2

[federicoOlbia]

I have assebled a new pc:
Mb Intel chipset p33
Cpu Q6600
SK Graphic nvidia 8800 gt 512 Pcie
3 gb ram ddr 2 Kingston 667
2 hd WD re2 Sata 2 320gb
dv-storm2
edius dvx 4.61
Win xp sp2

but when I try to acquire I do not see nothing in the monitor, only some fixed image
you can help me
Thanks

[tony]

I Could be wrong but, it could be an overlay setting and I think it takes a reboot to take effect.

[virgil21]

when I try to acquire I do not see nothing in the monitor, only some fixed image

Have you tried adding the line below to that section in canopus.ini?

[DVX-E1.dvxcore]
PCIConfigChange=2

[federicoOlbia]

Have you tried adding the line below to that section in canopus.ini?

[DVX-E1.dvxcore]
PCIConfigChange=2

I have a dvstorm 2

[federicoOlbia]

I Could be wrong but, it could be an overlay setting and I think it takes a reboot to take effect.

edius doesn't allow me to change method of overlay
Thanks

[antonsvideo]

Edius should give you two overlay choices, Direct Draw and Direct 3D

http://www.videoproductions.com.au/edius45/overlay-settings.gif

[federicoOlbia]

Edius should give you two overlay choices, Direct Draw and Direct 3D
http://www.videoproductions.com.au/e...y-settings.gif

edius not allows me to change the overlay setting... looks at the link Thanks
http://www.xp-cube.com/dvstormSettingOverlay.JPG

[SRsupport]

Anton,

With the storm you can not use 3d 9.
That is because of the way the storm works.

The new overlay is available in ohci/sp/nx/sd/hd
I think the op will have better luck if it is an overlay issue to use the ini edit.

Steve

[federicoOlbia]

Anton,

With the storm you can not use 3d 9.
That is because of the way the storm works.

The new overlay is available in ohci/sp/nx/sd/hd
I think the op will have better luck if it is an overlay issue to use the ini edit.

Steve

Thing recommends me to do then
Thanks

[SRsupport]

When screen overlay does not show correctly with certain graphics cards
If your screen overlay does not show correctly with PCI Express graphics cards), please add the below lines in the Canopus.ini file located in the C:\WINDOWS folder.
[DVStorm-RT.stmcore.conf]
OverlayMethod=1

When the overlay does not show correctly when using certain graphics cards, you may also try adding the below lines in the Canopus.ini file located in the C:\Windows folder.
[DVStorm-RT.stmdd]
OverlayUpdateMethod=1

If the above setting still does not fix the issue, please try changing the settings as below:
[DVStorm-RT.stmdd]
OverlayUpdateMethod=0

[federicoOlbia]

When screen overlay does not show correctly with certain graphics cards
If your screen overlay does not show correctly with PCI Express graphics cards), please add the below lines in the Canopus.ini file located in the C:\WINDOWS folder.
[DVStorm-RT.stmcore.conf]
OverlayMethod=1

When the overlay does not show correctly when using certain graphics cards, you may also try adding the below lines in the Canopus.ini file located in the C:\Windows folder.
[DVStorm-RT.stmdd]
OverlayUpdateMethod=1

If the above setting still does not fix the issue, please try changing the settings as below:
[DVStorm-RT.stmdd]
OverlayUpdateMethod=0

I must use the line [DVStorm-RT.stmcore.conf] OverlayMethod=1
together with the line
[DVStorm-RT.stmdd] OverlayUpdateMethod=1
thanks ?

[federicoOlbia]

Anton,

With the storm you can not use 3d 9.
That is because of the way the storm works.

The new overlay is available in ohci/sp/nx/sd/hd
I think the op will have better luck if it is an overlay issue to use the ini edit.

Steve

With the dvstorm 2 also inserted in the pc the integrated firewire don't correctly acquire, if I eliminate the card instead from the pc edius it captures without problems from the firewire, you can help me, thanks of your patience

[virgil21]

With the dvstorm 2 also inserted in the pc the integrated firewire don't correctly acquire, if I eliminate the card instead from the pc edius it captures without problems from the firewire, you can help me, thanks of your patience

As posted earlier, this is how I solved that exact problem with the DVX card which is a variant of the DVStorm.

[DVX-E1.dvxcore]
PCIConfigChange=2

Have you looked at your CANOPUS.INI file to see if there is a similar section to this one?

[DVX-E1.dvxcore]

It could be called [something-else.dvxcore].

If the section does not exist, then you can work out what the "something else" is from the other section headings and then try creating a similar entry to that above.

For example, it might be [DVStorm2.dvxcore]

And if "PCIConfigChange=2" does not work you can also try

PCIConfigChange=1

and

PCIConfigChange=3.

This is a known issue and you will see it documented on the Canopus hardware compatibility list webpage - although not every motherboard which is affected is listed there.

[harveylexton]

It may also be in your graphics card settings. This is in the advance settings.