Tweet
I want to know about TYAN mother Board S5396 (Intel 6321ESB chipset,Intel 5400 chipset) support or not with EDIUS NX Express series hardware card.
-
-
The express card requires 2 pci-e slots,not pci-x... I believe.Originally posted by dvkong View Post
After looking at the motherboard, it has 2 pci-e slots. The 16x would be for your video card and the 8x for whatever.
If you had the NX that had the pci-e and pci cards I believe the board would work. The pci-x board definitely would work, if you can find one. That does not have the encoder on board, neither does the pci-e pci setup.
The newer chipsets are not as problematic as the older chipsets and normally will work with fewer issues, if any. But then, there are occasions...Jerry
Six Gill DV
If you own the Tutorials and you need help, PM me.
Vistitle YouTube Channel
https://www.youtube.com/channel/UCMVlxC8Am4qFbkXJRoPAnMQ/videos
Main System:: Azrock z690 Taichi, [email protected], 64gb ram, Lian Li Galahad 360mm in push pull, Lian Li 011 Dynamic XL ROG case, 13 Lian Infinity fans, Win11 Pro , Samsung 980 1tb boot NVME, 2TB Sabrent M.2 NVME, 2 TB WD 850x NVME, 1TB Samsung SSD, 12TB Raid 0, BM MINI MONITOR 4K, , Dual LG 27GK65S-B 144Hz monitors, GTX 1080ti SC Black.
Second System: EditHD Ultimax-i7, X58, [email protected], Corsair H80, Win764, 24gb ram, Storm 3g, Samsung 840 Pro 256, 4tb and 6tb RAID 0 on backplane, GTX 980ti Classified, Edius 9, Apple 30", Samsung 24", dual BD. -
can NX card use for PCI-X slot?
I am use TYAN motherboard S2676 since 2005, I want upgrade to S5396
My Hardware board is "Edius NX for HDV" (old verson , use 64bit/66MHz slot)
The installation manual said that for HD editing use a 64bit/66MHz bus,
64bit/66MHz PCI slot is longer than general 32bit/33MHz PCI slot.
(Remark:I just need one slot for Edius NX hardware board to edit, no need Expansion board)
So, I want to make sure "Edius NX board is work for PCI-X type.
I know that PCI-Express slot is use for display card.
TYAN S5396 motherboard has two PCI-X 133/100MHz slots,
can I use this slot for NX borad?
Thanks!
see my NX board photoLast edited by dvkong; 04-13-2008, 02:45 AM.Comment
-
Just curious, why do you not need an expansions kit? The NX seems to me to be a bit of a waste without it.Comment
-
I just need my PC monitor to editing SD/HDComment
-
IIRC, you won't get the HD presets without the expansion kit, but maybe I'm mis-remembering...Comment
-
Either way without the expansion kit, there is no way to monitor HD. You have to edit HD footage in an SD timeline and use the S-Video output to preview.
Expansion kit is a must in my opinion.Comment
Comment