Announcement

Collapse
No announcement yet.

Xplode Pro 4.60 and new driver RADEON X1950XT: realtime isn't ready yet.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Xplode Pro 4.60 and new driver RADEON X1950XT: realtime isn't ready yet.

    Hi, I use Edius 4.6 with Xplode 4.6 and SAPPHIRE RADEON X1950XT 256MB GDDR3 for my HDV projects.
    In the past time I never had realtime, only some transitions. Yesterday I did nurture false hopes.
    Infact I have installed the latest driver of videocard v.8.3 but I havn't realtime again.
    I have added D3D7ATI.DLL in Stage folder but I have not realtime again..
    I have configured Xplode in the right way. Are there guys don't work in realtime with my same videocard? Could I live on hope?
    thanks


    This is my hardware config:

    Motherboard: P5W HD DELUXE
    MICROP. CONROE E6600 2,40GHz FSB 1066 4MB cache LGA775
    Videocard: SAPPHIRE RADEON X1950XT 256MB GDDR3
    RAM: 3 GB KINGSTON DDR800
    HDs: RAID 0
    A lonesome traveler looking for lost tribes around the world: https://www.youtube.com/c/ExploringWorldA/videos
    CPU: Intel i9 7940X
    MOTHERBOARD: Asus PRIME X299-DELUXE
    VIDEOCARD: NVIDIA GEFORCE GTX 1080Ti
    SSD Drive:
    (C) 512GB Samsung 960 EVO PCIe M.2 NVMe (for Windows 10)
    (D) 1TB Samsung 960 EVO PCIe M.2 NVMe

  • #2
    I have just forgotten to tell you if I configure Xplode with D3D7ATI.DLL et. etc.
    on the timeline when the cursor pass on the transition I see a green screening only. I don't see any transition.
    A lonesome traveler looking for lost tribes around the world: https://www.youtube.com/c/ExploringWorldA/videos
    CPU: Intel i9 7940X
    MOTHERBOARD: Asus PRIME X299-DELUXE
    VIDEOCARD: NVIDIA GEFORCE GTX 1080Ti
    SSD Drive:
    (C) 512GB Samsung 960 EVO PCIe M.2 NVMe (for Windows 10)
    (D) 1TB Samsung 960 EVO PCIe M.2 NVMe

    Comment


    • #3
      Read the last post by me in this thread.

      Install the patch and select ATI renderer.

      Comment


      • #4
        Originally posted by STORMDAVE View Post
        Read the last post by me in this thread.

        Install the patch and select ATI renderer.
        Sure I have done what you have written. I have manually added D3D7ATI.DLL in Stage folder, then in Xplodeconfig I have selected ATI renderer but it dosn't work. Perhaps have I to configure other things? I see a green screning only for the whole period of the transition. I don't see the transitions.
        A lonesome traveler looking for lost tribes around the world: https://www.youtube.com/c/ExploringWorldA/videos
        CPU: Intel i9 7940X
        MOTHERBOARD: Asus PRIME X299-DELUXE
        VIDEOCARD: NVIDIA GEFORCE GTX 1080Ti
        SSD Drive:
        (C) 512GB Samsung 960 EVO PCIe M.2 NVMe (for Windows 10)
        (D) 1TB Samsung 960 EVO PCIe M.2 NVMe

        Comment


        • #5
          use an older driver
          Steve
          EDIUS Trainer, Grass Cutter Gold
          A proud EDIUS EDITOR
          For more information on the Grass Cutter program please visit: http://www.grass-cutters.net

          Comment


          • #6
            Originally posted by SRsupport View Post
            use an older driver
            The previous doesn't work too.
            A lonesome traveler looking for lost tribes around the world: https://www.youtube.com/c/ExploringWorldA/videos
            CPU: Intel i9 7940X
            MOTHERBOARD: Asus PRIME X299-DELUXE
            VIDEOCARD: NVIDIA GEFORCE GTX 1080Ti
            SSD Drive:
            (C) 512GB Samsung 960 EVO PCIe M.2 NVMe (for Windows 10)
            (D) 1TB Samsung 960 EVO PCIe M.2 NVMe

            Comment


            • #7
              then you must be doing something wrong
              Steve
              EDIUS Trainer, Grass Cutter Gold
              A proud EDIUS EDITOR
              For more information on the Grass Cutter program please visit: http://www.grass-cutters.net

              Comment


              • #8
                I have the X1900 and it is RT for me.

                Comment


                • #9
                  Originally posted by Ulisse View Post
                  Hi, I use Edius 4.6 with Xplode 4.6 and SAPPHIRE RADEON X1950XT 256MB GDDR3 for my HDV projects.
                  In the past time I never had realtime, only some transitions. Yesterday I did nurture false hopes.
                  Infact I have installed the latest driver of videocard v.8.3 but I havn't realtime again.
                  I have added D3D7ATI.DLL in Stage folder but I have not realtime again..
                  I have configured Xplode in the right way. Are there guys don't work in realtime with my same videocard? Could I live on hope?
                  thanks


                  This is my hardware config:

                  Motherboard: P5W HD DELUXE
                  MICROP. CONROE E6600 2,40GHz FSB 1066 4MB cache LGA775


                  Videocard: SAPPHIRE RADEON X1950XT 256MB GDDR3
                  RAM: 3 GB KINGSTON DDR800
                  HDs: RAID 0

                  You will NOT get RT in HD projects. You will get RT with DV files in an SD timeline preset.

                  Try this.
                  Uninstall Xplode 4.6 and the renderers.
                  Completely uninstall all of the drives for the card
                  Uninstall the card in hardware device manager
                  Turn off the computer a let it set for 30sec to 1 minute
                  Restart the computer
                  Install the drivers that shipped with the card.
                  Reboot
                  Install Xplode 4.6, ati renderers, and patch.
                  reboot.
                  Set up the ati renderer.
                  Start Edius
                  Choose SD timeline, put 2 dv files on the timeline, apply xplode pro effect

                  I think that should give you a fresh start.
                  Jerry
                  Six Gill DV
                  www.sgdvtutorials.com
                  If you own the Tutorials and you need help, PM me.

                  Vistitle YouTube Channel
                  https://www.youtube.com/channel/UCMVlxC8Am4qFbkXJRoPAnMQ/videos

                  Windows 10 Pro up to v.1803 Tweaks for Edius Users
                  http://sgdvtutorials.com/WIN%2010%20...%20V.2.0.0.pdf


                  Main System:: Azrock Z97 Extreme 6, [email protected], 32gb ram, Corsair H110, Win10 Pro 64, Samsung 850 pro, E7.5/8.5/E9 on separate SSD drives, HD Spark, Intensity Shuttle, 12tb RAID 0 on backplane ,2 BD, Benq 27 and Hanns-G 28 monitors, CC 2019, GTX 1080ti SC Black.
                  Second System: EditHD Ultimax-i7, X58, [email protected], Corsair H80, Win764, 24gb ram, Storm 3g, Samsung 840 Pro 256, 4tb and 6tb RAID 0 on backplane, GTX 980ti Classified, Edius 9, Apple 30", Samsung 24", dual BD.

                  Comment


                  • #10
                    Try reinstallin Xplode, but when the option window comes up, choose 'modify', that should solve the green screen issue.....well, it had solved mine when I had a similar problem......if it dont work, then do a compplete reinstall of xplode

                    Comment


                    • #11
                      Originally posted by Jerry View Post
                      You will NOT get RT in HD projects. You will get RT with DV files in an SD timeline preset.
                      Sure if I use DV files in an SD timeline preset I always get RT. My problem is in HD project only. Bu I have noticed many guys use HD projects in RT.
                      A lonesome traveler looking for lost tribes around the world: https://www.youtube.com/c/ExploringWorldA/videos
                      CPU: Intel i9 7940X
                      MOTHERBOARD: Asus PRIME X299-DELUXE
                      VIDEOCARD: NVIDIA GEFORCE GTX 1080Ti
                      SSD Drive:
                      (C) 512GB Samsung 960 EVO PCIe M.2 NVMe (for Windows 10)
                      (D) 1TB Samsung 960 EVO PCIe M.2 NVMe

                      Comment


                      • #12
                        Originally posted by Ulisse View Post
                        Sure if I use DV files in an SD timeline preset I always get RT. My problem is in HD project only. Bu I have noticed many guys use HD projects in RT.
                        Well,
                        Those are the very lucky ones.
                        I would contact those posters personally to find out how they did it and what card and motherboard they are using. If you are getting the blue line above the timeline in SD, consider yourself lucky as well. Xplode was not designed as an RT effects package.

                        RT means different things to different people. If it is true RT, you will get a blue line above the timeline. In HD, the best I can get on any of my cards is the red line and play through without buffer prefill. (This depends on the effect and length as well) This means that the effect has to be rendered for smooth playback.
                        I would concentrate on making the best product possible and not worrying about RT with Xplode.
                        If I get it, great! If not, great!
                        Since I work in 1920x1080 uncompressed alot of the time, RT went bye bye long ago.
                        Good luck in finding the pot of gold.
                        Jerry
                        Six Gill DV
                        www.sgdvtutorials.com
                        If you own the Tutorials and you need help, PM me.

                        Vistitle YouTube Channel
                        https://www.youtube.com/channel/UCMVlxC8Am4qFbkXJRoPAnMQ/videos

                        Windows 10 Pro up to v.1803 Tweaks for Edius Users
                        http://sgdvtutorials.com/WIN%2010%20...%20V.2.0.0.pdf


                        Main System:: Azrock Z97 Extreme 6, [email protected], 32gb ram, Corsair H110, Win10 Pro 64, Samsung 850 pro, E7.5/8.5/E9 on separate SSD drives, HD Spark, Intensity Shuttle, 12tb RAID 0 on backplane ,2 BD, Benq 27 and Hanns-G 28 monitors, CC 2019, GTX 1080ti SC Black.
                        Second System: EditHD Ultimax-i7, X58, [email protected], Corsair H80, Win764, 24gb ram, Storm 3g, Samsung 840 Pro 256, 4tb and 6tb RAID 0 on backplane, GTX 980ti Classified, Edius 9, Apple 30", Samsung 24", dual BD.

                        Comment

                        Working...
                        X