No announcement yet.

Blackmagic Intensity Pro 4K - capture randomly stops

  • Filter
  • Time
  • Show
Clear All
new posts

  • Blackmagic Intensity Pro 4K - capture randomly stops

    With both the original Blackmagic Intensity Pro and also the newer IP 4K, when capturing via Edius analogue capture, the capture starts fine but then randomly just stops early. The capture window closes and the file is produced to the point it stopped.

    Anyone else experienced this and found a workaround?

    Capturing on the same system with Media Express software from BM is fine. Captures until I manually stop. Although it flags interlace footage with the incorrect upper/ lower field first. After import to Edius I have to manually change the field order.
    Mark Stuart

  • #2
    try the IP4k in a different slot if you have one, maybe the one it is is is shared with some other item
    Anton Strauss
    Antons Video Productions - Sydney

    EDIUS X WG with BM Mini Monitor 4k and BM Mini Recorder, Gigabyte X299 UD4 Pro, Intel Core i9 9960X 16 Core, 32 Threads @ 4.3Ghz, Corsair Water Cooling, Gigabyte RTX-2070 Super 3X 8GB Video Card, Samsung 860 Pro 512GB SSD for System, 8TB Samsung Raid0 SSD for Video, 2 Pioneer BDR-209 Blu-ray/DVD burners, Hotswap Bay for 3.5" Sata and 2.5" SSD, Phanteks Enthoo Pro XL Tower, Corsair 32GB DDR4 Ram, Win10 Pro