Announcement

Collapse
No announcement yet.

Problem with sequence

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Problem with sequence

    Hello everyone.
    I work on a wedding and i make 5 sequences + one the complete.So when I preview each sequence apart evrything is OK video,transition effect audio.When I preview the complete 45sequenece also everything is ok.Now I try the first time to make a AVI file.and when is done I preview this and the audio at end of the file is shorter then the video.Then I try to make a mt2 file to print to tape and when He as render about 95% he stop.So I don't now what I doing throng.Maybe can anyome help me with this.Thje last thing I going to try today is copy and paste all the files to one timeline and try to render to print on a DVD.

    Thank you all

  • #2
    I actually like copy paste all sequences into a final one, it is easy to fine tune things then

    the important thing is to make sure VA1 has focus when you Shift+A and Ctrl+C a sequence

    then go to new empty compile sequence and make sure VA1 has focus when you press Ctrl+V

    then Shift+A and Ctrl+C the next sequence

    then place cursor in desired joining position of compile sequence, make sure VA1 has focus and press Ctrl+V

    so, combining 5 sequences will be over in 20 seconds or less and this way, all clips and effects are instantly accessible
    Anton Strauss
    Antons Video Productions - Sydney

    EDIUS X WG with BM Mini Monitor 4k and BM Mini Recorder, Gigabyte X299 UD4 Pro, Intel Core i9 9960X 16 Core, 32 Threads @ 4.3Ghz, Corsair Water Cooling, Gigabyte RTX-2070 Super 3X 8GB Video Card, Samsung 860 Pro 512GB SSD for System, 8TB Samsung Raid0 SSD for Video, 2 Pioneer BDR-209 Blu-ray/DVD burners, Hotswap Bay for 3.5" Sata and 2.5" SSD, Phanteks Enthoo Pro XL Tower, Corsair 32GB DDR4 Ram, Win10 Pro

    Comment


    • #3
      Hello Anton,thank you for the reply.
      I don't no if we understand each other.Wat you tell me ist ok you copy ererything from the timeline with alt c and then you paste it on the complete sequence.But what I'm doing is I take the BIN sequence(one clip) and I paste this on a new squence and so each sequence.Only the bin sequence.I hope you understand me.And when I do this I have problems with the length of the music or audio.And tonigh I'm going to try the way that you explain to me.

      Sorry for my English

      Francisco

      Comment


      • #4
        I use Ctrl+C for copy

        I know of your way with single sequence clips but I have not tried it because I like my way where I can easily fine tune things, sorry

        maybe you have discovered a bug but I can't be sure until I try it
        Anton Strauss
        Antons Video Productions - Sydney

        EDIUS X WG with BM Mini Monitor 4k and BM Mini Recorder, Gigabyte X299 UD4 Pro, Intel Core i9 9960X 16 Core, 32 Threads @ 4.3Ghz, Corsair Water Cooling, Gigabyte RTX-2070 Super 3X 8GB Video Card, Samsung 860 Pro 512GB SSD for System, 8TB Samsung Raid0 SSD for Video, 2 Pioneer BDR-209 Blu-ray/DVD burners, Hotswap Bay for 3.5" Sata and 2.5" SSD, Phanteks Enthoo Pro XL Tower, Corsair 32GB DDR4 Ram, Win10 Pro

        Comment


        • #5
          Sorry you right ,for copy its ctrl C.
          I try it tonight on your way.One more question if you have one sequence with for ex.
          1 VA , 8 V , and 4 Audio and another with 2 VA , 6 V and 3 Audio when you copy them to a new sequence you need to preset the new sequence with the bigger number VA, V and A or just copy and paste and he create the number of timeline you need.

          Thank again

          Comment


          • #6
            I think the extra needed track will be created automatically but can't be sure until I try

            my default projects usually have enough tracks already, so I never encountered your scenario
            Anton Strauss
            Antons Video Productions - Sydney

            EDIUS X WG with BM Mini Monitor 4k and BM Mini Recorder, Gigabyte X299 UD4 Pro, Intel Core i9 9960X 16 Core, 32 Threads @ 4.3Ghz, Corsair Water Cooling, Gigabyte RTX-2070 Super 3X 8GB Video Card, Samsung 860 Pro 512GB SSD for System, 8TB Samsung Raid0 SSD for Video, 2 Pioneer BDR-209 Blu-ray/DVD burners, Hotswap Bay for 3.5" Sata and 2.5" SSD, Phanteks Enthoo Pro XL Tower, Corsair 32GB DDR4 Ram, Win10 Pro

            Comment


            • #7
              Thank you for all Anton

              Bye

              Comment


              • #8
                hello again,

                So I finish my first wedding about an hour and 10 minutes,everything is ok
                (I think).Now I want to print to file to burn on DVD and about 30% render he failed.Its appeard a little windows with the warning or something like
                "Can't not found some clips or bad footage.......
                Is it any way to find where is the problem or the bad footage or clip or any other way to find the problem without to start the project again.(3 month of work)Any suggestion are welkom.

                Thanks

                Comment


                • #9
                  what is your project setting? Pal, NTSC, HD, SD, 4:3 or 16:9?

                  are you using ProCoder Express to create the DVD files? (should work)

                  or are you using the new DVD creator? (may not work fine, especially if there are sequences)

                  now that you combined all sequences, you could close or delete the others and try again

                  be sure that all hard disks are NTFS formatted (even C drive), if not, DVD creation will fail
                  Anton Strauss
                  Antons Video Productions - Sydney

                  EDIUS X WG with BM Mini Monitor 4k and BM Mini Recorder, Gigabyte X299 UD4 Pro, Intel Core i9 9960X 16 Core, 32 Threads @ 4.3Ghz, Corsair Water Cooling, Gigabyte RTX-2070 Super 3X 8GB Video Card, Samsung 860 Pro 512GB SSD for System, 8TB Samsung Raid0 SSD for Video, 2 Pioneer BDR-209 Blu-ray/DVD burners, Hotswap Bay for 3.5" Sata and 2.5" SSD, Phanteks Enthoo Pro XL Tower, Corsair 32GB DDR4 Ram, Win10 Pro

                  Comment


                  • #10
                    Hello Anton

                    My project is HD 16:9
                    I use Procoder Express and all the drive are NTFS
                    I have now only one sequence all the other are deleted.
                    I do this several time without problems.
                    Can I perhaps try to burn directly to the dvd with dvd creator??

                    Bye

                    Comment


                    • #11
                      Originally posted by kikillo View Post
                      Hello Anton

                      My project is HD 16:9
                      I use Procoder Express and all the drive are NTFS
                      I have now only one sequence all the other are deleted.
                      I do this several time without problems.
                      Can I perhaps try to burn directly to the dvd with dvd creator??

                      Bye
                      you can burn directly to DVD with ProCoder Express
                      http://www.videoproductions.com.au/html/pce-dvd.html

                      you can't export to DVD with DVD Creator because your project is HD and HD is not suitable for DVD Creator at this stage
                      Anton Strauss
                      Antons Video Productions - Sydney

                      EDIUS X WG with BM Mini Monitor 4k and BM Mini Recorder, Gigabyte X299 UD4 Pro, Intel Core i9 9960X 16 Core, 32 Threads @ 4.3Ghz, Corsair Water Cooling, Gigabyte RTX-2070 Super 3X 8GB Video Card, Samsung 860 Pro 512GB SSD for System, 8TB Samsung Raid0 SSD for Video, 2 Pioneer BDR-209 Blu-ray/DVD burners, Hotswap Bay for 3.5" Sata and 2.5" SSD, Phanteks Enthoo Pro XL Tower, Corsair 32GB DDR4 Ram, Win10 Pro

                      Comment


                      • #12
                        Hello again,

                        Ok now I have make my DVD and also I print to HDV Tape.The problem was a corrupt Wave file that sometimes he played and sometime not.I was Just looking when he not played.So I change this Wave file and Edius no crasch anymore.I was so happy untill the moment or I have to look at he film.Everything is ok ,all the transitions,effect filters.Only at the end of the film I miss it about 20 to 25 seconds of music.But on my project I have enough music,itself more than the video.I do not understand this little problem.My IN and OUT point are also before and after the video and audio.

                        Suggestions ??
                        Thanks

                        Comment


                        • #13
                          in order to export everything between in and out, you need Edius 4.6

                          earlier versions of Edius 4.5 are faulty in the export between in and out if the outpoint is after the end of project
                          Anton Strauss
                          Antons Video Productions - Sydney

                          EDIUS X WG with BM Mini Monitor 4k and BM Mini Recorder, Gigabyte X299 UD4 Pro, Intel Core i9 9960X 16 Core, 32 Threads @ 4.3Ghz, Corsair Water Cooling, Gigabyte RTX-2070 Super 3X 8GB Video Card, Samsung 860 Pro 512GB SSD for System, 8TB Samsung Raid0 SSD for Video, 2 Pioneer BDR-209 Blu-ray/DVD burners, Hotswap Bay for 3.5" Sata and 2.5" SSD, Phanteks Enthoo Pro XL Tower, Corsair 32GB DDR4 Ram, Win10 Pro

                          Comment

                          Working...
                          X