Announcement

Collapse
No announcement yet.

Print to DVD not highlighted?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Print to DVD not highlighted?

    When I try to export to print DVD ... the lettering is not highlighted ...nor can I activate in Record mode...I cannot find under Canopus programs...DVD Creator...where is this located and what do I do to the the time line to get DVD Creator to activate? Help. I have 4.6 and I am up to date...

    Thanks for any help!!!

    Ralph Bowman

  • #2
    is your project setting on standard def Pal or NTSC? it needs to be
    Anton Strauss
    Antons Video Productions - Sydney

    EDIUS X WG with BM Mini Monitor 4k and BM Mini Recorder, Gigabyte X299 UD4 Pro, Intel Core i9 9960X 16 Core, 32 Threads @ 4.3Ghz, Corsair Water Cooling, Gigabyte RTX-2070 Super 3X 8GB Video Card, Samsung 860 Pro 512GB SSD for System, 8TB Samsung Raid0 SSD for Video, 2 Pioneer BDR-209 Blu-ray/DVD burners, Hotswap Bay for 3.5" Sata and 2.5" SSD, Phanteks Enthoo Pro XL Tower, Corsair 32GB DDR4 Ram, Win10 Pro 21H2

    Comment


    • #3
      Anton is correct, you need to switch Project Settings to 59.94i to activate the DVD feature. Unfortunately, there is no stand-alone DVD creation software.

      I think it will also print to DVD from the Timeline with 59.94i HDV projects.
      Rusty Rogers | Films
      >TYAN S7025 - 32GB RAM, 2 x Xeon X5690's, 4 x 10k video HD's, Win10 x64, BM DecklinkHD, nVidia TITAN, 12TB DroboPro w/iSCISI connection
      >RAZER BLADE - QHD+ - 16GB RAM, i7-6700HQ Quad, 512GB SSD, Win10 x64, GeForce GTX 1060 6GB

      An inglorious peace is better than a dishonorable war.
      Twain - "Glances at History" 1906

      Comment


      • #4
        Originally posted by ralphbowman View Post
        When I try to export to print DVD ... the lettering is not highlighted ...nor can I activate in Record mode...I cannot find under Canopus programs...DVD Creator...where is this located and what do I do to the the time line to get DVD Creator to activate? Help. I have 4.6 and I am up to date...

        Thanks for any help!!!

        Ralph Bowman
        progressive will not work
        Vista 64 * Asus P6* Intel i7 920 @ 2.67 GHz CPU * 12 gigs Corsair * Nvidia GTX 275 * WD 150 gig 10,000 rpm System drive * (2) Hitachi 750 gig Video drives * (2) WD 1 TB Video drives * HD Spark * Edius 6.02, Imaginate, Adobe AE, Photoshop, Illustrator

        Comment


        • #5
          Rusty is correct - any project that is specifically 59.94i or 50i will allow Print to DVD functionality. This is because the built-in MPEG encoder for the DVD authoring cannot encode frame rate changes, only resolution (scaling) changes.

          Comment


          • #6
            Thank you gentlemen!

            I switched the project setting to 59.94i and now the button is highlighted...and I can preview through my firewire to my ntsc monitor...now where in the fine print of the manual or help menu was this bit of info buried? Where in the video training down loads is this mentioned? The wonders of Edius!
            Thanks to all...

            Ralph Bowman

            Comment


            • #7
              All "fine print" is revealed on the Forum :)
              Rusty Rogers | Films
              >TYAN S7025 - 32GB RAM, 2 x Xeon X5690's, 4 x 10k video HD's, Win10 x64, BM DecklinkHD, nVidia TITAN, 12TB DroboPro w/iSCISI connection
              >RAZER BLADE - QHD+ - 16GB RAM, i7-6700HQ Quad, 512GB SSD, Win10 x64, GeForce GTX 1060 6GB

              An inglorious peace is better than a dishonorable war.
              Twain - "Glances at History" 1906

              Comment


              • #8
                Same print to DVD problem????

                Hey guys, Found this helpful tip but I have my project settings at 59.94i NTSC already and I cannot get the print to DVD to highlight. I am in version 4.6.

                Any other ideas?

                Thanks!
                Steven S.

                Comment


                • #9
                  Click on top the timeline press x
                  press home set in point
                  press end set out point


                  Steve
                  Steve
                  EDIUS Trainer, Grass Cutter Gold
                  A proud EDIUS EDITOR
                  For more information on the Grass Cutter program please visit: http://www.grass-cutters.net

                  Comment


                  • #10
                    I changed to NTSC but all it shows is "p" mode.

                    I used an AVI file from my Canon still camera (movie) and processed it with the 'p' mode... changing it to and 'i' mode is not possible. It don't show up in the selection.

                    Do I start the entire project from the begining?

                    Comment


                    • #11
                      Output you project as a file, start a 29.97i project, and import that file.

                      Comment

                      Working...
                      X