Announcement

Collapse
No announcement yet.

Help after installing new agp card please

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Help after installing new agp card please

    I have just installed Nvidia Geforce 7600gs into my Asus P4C800 mb replacing my old FX5500. I am using Edius 4.54.
    I dont have any pictures in the Edius monitor windows, just black, the sound is there but nothing else. I do however get a picture only when I click the Start button on my desktop taskbar. It then vanishes as soon as I click the Edius program.
    I also get picture if I use DVD Architect, but alas not Edius.
    Can anyone please help me sort this out.
    Mike Trewhella
    Intel Core i7 processor 3770K 3.50GHz, ASUS Sabertooth Z7 Mother Board, NVidia Graphics card GTX 465, 16GB RAM, Antec 300 case, Windows 7 Ultimate (64), Edius 6.55, Vistitle 2.5

  • #2
    How did you install the driver for the new card?

    The correct steps should be as follows -

    a) The PC with the old video card inside ... remove the software driver for that old card.
    b) Configure windows for standard VGA mode.
    c) REBOOT the PC
    d) When Windows comes in VGA - shutdown the PC, and power it off
    e) Remove old video card, plug in new video card
    f) Boot up the PC and let Windows come up
    g) Install the new device driver

    I am assuming there is no h/w conflict on my motherboard.
    TingSern
    --------------------------------------
    Edius 9.4 Pro, Lenovo P72 workstation laptop, 64GB RAM, Xeon CPU, Windows 10 Pro (64 bits), 2 x 2TB Samsung M2.NVME and 1 x 4TB Samsung SSD internal. Panasonic UX180 camera, Blackmagic 4K Pocket Cinema, Blackmagic Pocket Cinema

    Comment


    • #3
      Yes I unistalled the way you describe. I have just downloaded the latest drivers for the card and now get pictures..... BUT the pictures are too bright in Edius and correct in DVD Architect. Also when played out to a TV through the Storm card brightness is correct on TV. The picture on the Edius monitor freezes and does not run with the tv display.
      Mike Trewhella
      Intel Core i7 processor 3770K 3.50GHz, ASUS Sabertooth Z7 Mother Board, NVidia Graphics card GTX 465, 16GB RAM, Antec 300 case, Windows 7 Ultimate (64), Edius 6.55, Vistitle 2.5

      Comment


      • #4
        I read several posts about GeForce problems with EDIUS. Might be some incompatibility at work. Can't recall which cards already. You might be able to do a search of this forum and see.

        I understand EDIUS 4.54 do use the GPU for some functions. Can try asking Canopus tech support then?
        TingSern
        --------------------------------------
        Edius 9.4 Pro, Lenovo P72 workstation laptop, 64GB RAM, Xeon CPU, Windows 10 Pro (64 bits), 2 x 2TB Samsung M2.NVME and 1 x 4TB Samsung SSD internal. Panasonic UX180 camera, Blackmagic 4K Pocket Cinema, Blackmagic Pocket Cinema

        Comment


        • #5
          7600gs and latest drivers work just fine for me with Edius 4.5.
          Claire

          Edius 8.53 Workgroup, DVC Built i7 5960X 8 core Haswell-E Unlocked, Win10 Pro 64 bit, Gigabyte GA-X99-UD4, 32GB DDR4 RAM, RTX 2080 Ti 11GB, Decklink 4K Extreme 12G, TMPGEnc Movie Plug-in AVC, Eizo 31" ColorEdge CG319X HDR 4K monitor

          Comment


          • #6
            This card is recommended by Canopus on their website.
            Mike Trewhella
            Intel Core i7 processor 3770K 3.50GHz, ASUS Sabertooth Z7 Mother Board, NVidia Graphics card GTX 465, 16GB RAM, Antec 300 case, Windows 7 Ultimate (64), Edius 6.55, Vistitle 2.5

            Comment


            • #7
              what overlay method did you choose in Edius hardware settings? try one or the other and restart Edius
              Anton Strauss
              Antons Video Productions - Sydney

              EDIUS X WG with BM Mini Monitor 4k and BM Mini Recorder, Gigabyte X299 UD4 Pro, Intel Core i9 9960X 16 Core, 32 Threads @ 4.3Ghz, Corsair Water Cooling, Gigabyte RTX-2070 Super 3X 8GB Video Card, Samsung 860 Pro 512GB SSD for System, 8TB Samsung Raid0 SSD for Video, 2 Pioneer BDR-209 Blu-ray/DVD burners, Hotswap Bay for 3.5" Sata and 2.5" SSD, Phanteks Enthoo Pro XL Tower, Corsair 32GB DDR4 Ram, Win10 Pro

              Comment


              • #8
                Anton, Tthe options to change overlay are grayed out & unavailable.
                Mike Trewhella
                Intel Core i7 processor 3770K 3.50GHz, ASUS Sabertooth Z7 Mother Board, NVidia Graphics card GTX 465, 16GB RAM, Antec 300 case, Windows 7 Ultimate (64), Edius 6.55, Vistitle 2.5

                Comment


                • #9
                  I have just re-installed Edius 4.54 and things seem to be OK now.
                  Fingers crossed. Anyway thank you to all who answered my cry for help.
                  Mike Trewhella
                  Intel Core i7 processor 3770K 3.50GHz, ASUS Sabertooth Z7 Mother Board, NVidia Graphics card GTX 465, 16GB RAM, Antec 300 case, Windows 7 Ultimate (64), Edius 6.55, Vistitle 2.5

                  Comment

                  Working...
                  X