Tweet
I've got a Quadro FX1500 using Edius 4.54. I've got one DVI output for my 24" 1900 x 1200 LCD monitor and the component video out to a TV in SD mode. This computer does not have an NX card. The question is, how do I get the TV display to only show the video. I can drag the video display window to the TV but then it has the Edius menus on a screen that does not have enough resoultion to read them. Is there a way to set this up?
-
Main Edit Station: Edius 6.02, Gigabyte UD5, i7-950 @ 4.0, GTX 470, 12 GB GSkil, HD Spark, 4 TB RAID0 WD RE Video Drive, 2 TB RAID0 Render Drive
2nd Computer: Edius 6.03, Asus P6X58D-E, i7-950 @ 3.07, Radeon 2600, 6 GB Corsair, 1.5 TB RAID0 Video Drive -
All you're seeing is PC output to component. Like a second DVI.
There's been grumbling about switchable full-screen output to a PC monitor before, but I don't see it happening.
NX is a good value for the output.Rusty Rogers | Films
>TYAN S7025 - 32GB RAM, 2 x Xeon X5690's, 4 x 10k video HD's, Win10 x64, BM DecklinkHD, nVidia TITAN, 12TB DroboPro w/iSCISI connection
>RAZER BLADE - QHD+ - 16GB RAM, i7-6700HQ Quad, 512GB SSD, Win10 x64, GeForce GTX 1060 6GB
An inglorious peace is better than a dishonorable war.
Twain - "Glances at History" 1906 -
NX
This is my second workstation. I have an NX in my dual Xeon system which is great. So, what you are suggesting, full screen output, is being worked on? Might be a new feature? Great! If they give us that, what is the advantage of the hardware acceleration over my video card?Main Edit Station: Edius 6.02, Gigabyte UD5, i7-950 @ 4.0, GTX 470, 12 GB GSkil, HD Spark, 4 TB RAID0 WD RE Video Drive, 2 TB RAID0 Render Drive
2nd Computer: Edius 6.03, Asus P6X58D-E, i7-950 @ 3.07, Radeon 2600, 6 GB Corsair, 1.5 TB RAID0 Video DriveComment
-
Fx 1500
I have same card....can't be done. No inlay to monitor. Windows only. I was bummed. Nice card though.Vista 64 * Asus P6* Intel i7 920 @ 2.67 GHz CPU * 12 gigs Corsair * Nvidia GTX 275 * WD 150 gig 10,000 rpm System drive * (2) Hitachi 750 gig Video drives * (2) WD 1 TB Video drives * HD Spark * Edius 6.02, Imaginate, Adobe AE, Photoshop, IllustratorComment
-
I too have the same card and same setup. You should configure the Nvidea control panel to dual screen and monitor 2 should be configured as a TV. I get video overlay to my TV most of the time though sometimes I miss it and will be back may be after a restart. Also try Edius overlay settings to Direct 3D or Direct draw.
RajivComment
-
There aren't any plans for fullscreen output that I know of. It'd be deceptive at best, completely wrong (color and raster-wise) at worst.Comment
-
Bill:
Buy an ACEDVio card for less than $200 and you'll have great NTSC full screen video to watch as you edit. It is delayed about 1 second but that is less of a problem than you might expect.Fred D
Win 7 Pro-64 bit, EDIUS Workgroup 8.5, Intel Ivy Bridge i5, ASUS P8Z77-V-LK, 8GB Kningston DDR3, Pioneer BDR-209UBK, EVGA NVIDEA GEForce GT630, Corsair TX750M 750w Power Supply, 4 WD Black HDD for 3.15TB, ACEDVIO, Spark HD, eSATA controller, ANTEC 300 case.Comment
-
I have an old DV camera, Canon MV300 connected to the firewire port. My TV is connected to the camera.
Then you got a TV overlay. It is also delayed about a second, but it is great to monitor the picture quality on.Comment
Comment