Announcement

Collapse
No announcement yet.

Batch Export Bug? 4.52

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Batch Export Bug? 4.52

    Can anyone confirm this or am i doing something wrong?

    I have 9 sequences all about 5 minutes long ending on a TIF file with a dissolve on it - front and back.
    I am trying to export all the sequences as DV AVIs using the excellent batch export feature. When I look at the resulting AVI the dissolve on the end is missing. The whole clip is being exported so its not a case of stopping before the transition. It is consistent. I have also tried putting a colour matte on the end and dissolving to that but still have the same problem. If I export direct from the timeline ie not going through batch export it works fine

    Any ideas or a bug?
    Last edited by editpoint; 11-19-2007, 11:59 AM.

  • #2
    Are you marking In/Out properly?
    Batch Export requires it.
    Rusty Rogers | Films
    >TYAN S7025 - 32GB RAM, 2 x Xeon X5690's, 4 x 10k video HD's, Win10 x64, BM DecklinkHD, nVidia TITAN, 12TB DroboPro w/iSCISI connection
    >RAZER BLADE - QHD+ - 16GB RAM, i7-6700HQ Quad, 512GB SSD, Win10 x64, GeForce GTX 1060 6GB

    An inglorious peace is better than a dishonorable war.
    Twain - "Glances at History" 1906

    Comment


    • #3
      Yes the out point is dead on the end of the clip. I've even moved it out to after the clip finishes. Still the same.

      Have noticed though that if i split the last TIF into two clips it will then work.

      Comment


      • #4
        this is probably related to an existing bug
        Anton Strauss
        Antons Video Productions - Sydney

        EDIUS X WG with BM Mini Monitor 4k and BM Mini Recorder, Gigabyte X299 UD4 Pro, Intel Core i9 9960X 16 Core, 32 Threads @ 4.3Ghz, Corsair Water Cooling, Gigabyte RTX-2070 Super 3X 8GB Video Card, Samsung 860 Pro 512GB SSD for System, 8TB Samsung Raid0 SSD for Video, 2 Pioneer BDR-209 Blu-ray/DVD burners, Hotswap Bay for 3.5" Sata and 2.5" SSD, Phanteks Enthoo Pro XL Tower, Corsair 32GB DDR4 Ram, Win10 Pro

        Comment


        • #5
          Which bug Anton?

          Comment


          • #6
            the bug where Edius does not export all between in and out, export always stops on last frame and not on the outpoint where it should
            Anton Strauss
            Antons Video Productions - Sydney

            EDIUS X WG with BM Mini Monitor 4k and BM Mini Recorder, Gigabyte X299 UD4 Pro, Intel Core i9 9960X 16 Core, 32 Threads @ 4.3Ghz, Corsair Water Cooling, Gigabyte RTX-2070 Super 3X 8GB Video Card, Samsung 860 Pro 512GB SSD for System, 8TB Samsung Raid0 SSD for Video, 2 Pioneer BDR-209 Blu-ray/DVD burners, Hotswap Bay for 3.5" Sata and 2.5" SSD, Phanteks Enthoo Pro XL Tower, Corsair 32GB DDR4 Ram, Win10 Pro

            Comment


            • #7
              Originally posted by antonsvideo View Post
              the bug where Edius does not export all between in and out, export always stops on last frame and not on the outpoint where it should
              This is fixed in 4.6 (but not 4.54)

              Comment


              • #8
                Dont think this is the same bug. This does export all between in and out - it just ignores the fade.

                See the attachments. Although I was using TIFFs it also has the same problem with video files
                Attached Files
                Last edited by editpoint; 11-16-2007, 01:45 PM.

                Comment


                • #9
                  it appears to be a related bug

                  try this

                  place a short clip on timeline, set in at start of clip and out a few seconds after the end of the clip and then export

                  then check and see where the resulting clip ends, I bet not at the out point
                  Anton Strauss
                  Antons Video Productions - Sydney

                  EDIUS X WG with BM Mini Monitor 4k and BM Mini Recorder, Gigabyte X299 UD4 Pro, Intel Core i9 9960X 16 Core, 32 Threads @ 4.3Ghz, Corsair Water Cooling, Gigabyte RTX-2070 Super 3X 8GB Video Card, Samsung 860 Pro 512GB SSD for System, 8TB Samsung Raid0 SSD for Video, 2 Pioneer BDR-209 Blu-ray/DVD burners, Hotswap Bay for 3.5" Sata and 2.5" SSD, Phanteks Enthoo Pro XL Tower, Corsair 32GB DDR4 Ram, Win10 Pro

                  Comment


                  • #10
                    yes i have experienced that too. The "bug" ive discovered only happens with batch export. Both clips shown in the example shots are ok if you do a straight print to file

                    Comment


                    • #11
                      I wonder if it is fixed in 4.54?
                      Anton Strauss
                      Antons Video Productions - Sydney

                      EDIUS X WG with BM Mini Monitor 4k and BM Mini Recorder, Gigabyte X299 UD4 Pro, Intel Core i9 9960X 16 Core, 32 Threads @ 4.3Ghz, Corsair Water Cooling, Gigabyte RTX-2070 Super 3X 8GB Video Card, Samsung 860 Pro 512GB SSD for System, 8TB Samsung Raid0 SSD for Video, 2 Pioneer BDR-209 Blu-ray/DVD burners, Hotswap Bay for 3.5" Sata and 2.5" SSD, Phanteks Enthoo Pro XL Tower, Corsair 32GB DDR4 Ram, Win10 Pro

                      Comment


                      • #12
                        No its not fixed in 4.54.

                        Seems like there is a similar problem with Print to DVD http://ediusforum.grassvalley.com/fo...ead.php?t=3631

                        Can someone fro GV confirm this?

                        Comment


                        • #13
                          Sure, I just reproduced it here.

                          Comment

                          Working...
                          X