Timecode overlay issue-Edius 6.0.6

[Tomislav S]

Hello,

I have project 1920x1080 50p.
(Sony consumer camcorder recording in
MPEG2 Transport Stream

[Video Information]
H.264/AVC
Bit Rate : VBR 24500000 / 25999360 bps
Size : 1920 x 1080
Chroma Format : 4:2:0
Profile : [email protected]

[Audio Information]
Dolby Digital (AC-3)
Bit Rate : 448000 bps
Sampling Rate : 48000 Hz
Mode : 5.1 ch
)
When I add Title (QuickTitler) on T track I'm loosing timecode information.
When I disable title track, timecode is ok.
Do you have any information about this problem and how to solve it?

Thanks in advance.

[antonsvideo]

can you see if it happens when adding title to V track (recommended)

[Tomislav S]

can you see if it happens when adding title to V track (recommended)

Hi Anton,

It happens on V track too.

[antonsvideo]

I just tested with a 1920x1080 50p clip in 50p project and TC is always there during Vistitle, QuickTitle and TmPro

however, my clip is Canopus HQ with stereo wav audio and not H264/AVC with 5.1 audio

can you try another clip and see if it is ok

[GrassValley_SL]

Can you upload a short original clip so we can test with your footage?

[Claire]

When I add Title (QuickTitler) on T track I'm loosing timecode information.
When I disable title track, timecode is ok.

Same thing here with 1080P50 from Panasonic TM900 camera. The clip timecode goes to --/--/-- --:--:-- during titles, the sequence timecode remains.

[Hawke]

No problem here with a quick experiment using camera original 1080 50P.
Camera Panasonic HDC-SD900. Edius 6.06.
Addendum - Running on WXP.

[Tomislav S]

[QUOTE=GrassValley_SL;169157]Can you upload a short original clip so we can test with your footage?[/QUOT

http://jumbo.iskon.hr/dl/0gpt4kn5s72jvbt6/

[GrassValley_SL]

I checked with your footage and I don't get any timecode even without a title. Can you make sure you are seeing source time code.
Can you try this:
Go in to user-settings.

Playback: only select source time code.
Can you see any timecode in the overlay on playback?

[Tomislav S]

I checked with your footage and I don't get any timecode even without a title. Can you make sure you are seeing source time code.
Can you try this:
Go in to user-settings.

Playback: only select source time code.
Can you see any timecode in the overlay on playback?

Go to User settings/ On Screen Display and select source information

[GrassValley_SL]

So what so I do with that?

As I said I don't see the original timecode with your clip. I want to make sure you are seeing the source timecode and not the sequence time code.

Can you please re-read my post and try what I asked?
It is important to know what you are seeing at this point.

[Claire]

Just to say this thread solved the issue for me. In User Settings, Preview, Playback ((Edius 6.05) I noticed for the first time "Source Timecode Priority".

I changed this from lower track to upper track and my TM900 clips and that sample Sony clip now work fine with QuickTitler.

[GrassValley_SL]

That's been there for some versions. :)

[Tomislav S]

That's been there for some versions. :)

take a look on this please

[GrassValley_SL]

You are looking at recording day and time.
Can you put the overlay to just source timecode not DATE AND TIME. I get no source "timecode"


EDIT: your issue is lower/upper track. Your setting it is on lower-track and the title does not have recording date or time.