Slow Response?

[rickmd]

Just installed 4.5. When I move the in or out point on a clip in the timeline the monitor switches to the dual mode and then I have to wait 10 or 15 seconds before it switches back to the single mode, nothing works until that happens. Any ideas?

Thanks,
Rick

[antonsvideo]

this is normal, it is not dual mode

dual mode would give you 2 sets of player controls

after trimming, click the timeline ruler, does it change to proper view right away? it should

[rickmd]

No, everything hangs for 10 to 15 seconds!

[GrassValley_KH]

Are you using any hardware with EDIUS or is it just software-only?

[rickmd]

I have a DVStorm card installed, OHCI card, and firewire out to a Panasonic DVX100 for viewing on an external monitor.

Never had this problem with the previous upgrading.

[SRsupport]

I checked this for you:
Yes it switches to dual mode for the edit.
I am not seeing any delay or hang.

Do you have sound soap applied to any clip in the project you are working on?

Sr

[rickmd]

No filters applied to clips. I have tried every different setting I can think of but I still get a 10 to 15 second delay before the monitor switches back to single mode, nothing works until it resets.

Thanks

[Bryan Fieldhouse]

'fix'

I had the same problem!

to 'fix' it, simply turn off the realtime volume control and it will all work as normal.

hope this helps

bryan

[johannesj]

i did see this on other thread, it might work:
switch ref to internal free run

[GrassValley_KH]

Except that that particular remedy is for EDIUS SP, not DVStorm (no Ref Sync In)

To the original poster - what sort of graphics card do you have? In particular, the amount of video ram..

[rickmd]

I had the same problem!

to 'fix' it, simply turn off the realtime volume control and it will all work as normal.

hope this helps

bryan

Bryan,

Please explain how to do that.

Thanks,
Rick

[antonsvideo]

he meant to type to "close the audio mixer"

when the audio mixer is open, the buffer is on 0 and realtime performance is degraded

[fukly]

ohh.. IC!
now i found the answer to my 'slow response'
tx anton...i just upgraded my system to AMD X2 6000+ and use dual view.
1 monitor for time line...the other for video preview.. n got the same problem.
bcoz i try to fill the time line monitor with audio mixer,filters,bin,etc.
i tought its something to do with AMD or Nvidia compatibility...gosh!
now i'll shut the audio mixer down ;)

do u have any suggestion what to fill the blank spot above the time line?
filters,bin,...n what?
tx 4 this helpful forum..edius community r so great!

[antonsvideo]

do u have any suggestion what to fill the blank spot above the time line?
filters,bin,...n what?
tx 4 this helpful forum..edius community r so great!

why not fill the blank spot above the timeline with the timeline, see my layout

http://www.videoproductions.com.au/assets/images/Edius-dualmonitor.jpg

also, place the VU meter on preview mon and you won't need the audio mixer

also, customize to make the default cyan of the vu meter green so it looks more realistic

http://www.videoproductions.com.au/edius46/vu-meter-color.gif

[fukly]

tx anton,
will it be more powerful if i set the RT buffer to 512??why the default is 128 when we can set it to 512? i have 2 gigDDR2 and Nvidia256mb is it anything to do with this number.once again tx.