I had an error similar to this - try it for kicks..
---------------
It turned out to be that the Markers were too close together on the timeline (DVD Creator makes chapters from the markers by default - you cant turn this off, like in Procoder Express!)
So save the file, then save a copy, remove all the Markers and try burning that! :-)
Announcement
Collapse
No announcement yet.
DVD Creator will not write to the DVD
Collapse
X
-
I have tried what you suggested and unfortunately it does not work, I still get the same error message.Leave a comment:
-
do a small test
export a small section of your timeline to DV.avi after changing project to 48k
create new sequence and add the above exported clip
now try DVD CreatorLeave a comment:
-
I had changed the audio settings to 48khz before I tried to record the DVD.
I have always recorded my video projects at 4x with DVD Workshop 2 and never had a problem with it. With DVD Creator it will fail in my system no matter what the recording speed is.Leave a comment:
-
as seen by your project settings, your project contains non DVD compliant audio
all DVD must be 48k audio as minimum spec, you have it set to 44.1 for some unknown reason, always use 48k in anything video, the rest is for home movie makers :-))
Leave a comment:
-
Hi,
I have tried with a Memorex 16x DVD media, with 2x as writing speed and still get the same message.
Any more ideas please?
Thanks.Leave a comment:
-
Well, thanks again for the info.
There was no media in the drive when I took the screenshots.
I haven't been able to try yet again.
I'll keep you posted.Leave a comment:
-
I forgot to tell you that your media is not recognized by dvd creator. At least in t he picture you posted.Leave a comment:
-
Hi,
Thanks for your email.
I use 44.1 because this is what the final movie on the DVD will be capable of, isn't it?
I will try to save the project paying attention to max speed allowed by the burner and the media.
I will let you know if I have any luck.Leave a comment:
-
Forbidden?
Ok I had to use IE .
2 things :
1 Why is your audio 44.100khz Dv is 48khz or 32 Khz. WHere does that 44.1 come from?
2 Don't use the max burn speed
check what your media is and burn at a lower speed.
example.:
Media 8x burn at 6
Media 16 burn at 8x
if you don't want to so that use the speed of the media
example
media 8 burn at 8
media 16 burn at 16
SRLast edited by SRsupport; 08-22-2007, 09:57 PM.Leave a comment:
-
Leave a comment: