Edius Hd Overlay Problem With Supermicro Mainboard

[bashvideo]

hi

i take edius hd card , and the break out box , it contain sdi sd , sdi hd , component composite svideo all in-out , the breakout box is hdbx1000 .

[antonsvideo]

i take the card from usa a friend live there and he purchased it and shipp it to me .

strange, because the HD card is not for sale in USA without computer as a whole package

did you buy the breakoutbox so you can connect all possible equipment?
http://www.canopus.com/contentfiles/...1000H_back.png

is this your cardset?
http://www.canopus.com/contentfiles/..._BASEBOARD.png
http://www.canopus.com/contentfiles/...NENT_BOARD.png

[bashvideo]

i take the card from usa a friend live there and he purchased it and shipp it to me .

[antonsvideo]

also, where did you buy the HD card? I was unaware that it is now available for sale.

[antonsvideo]

reduce hardware acceleration of your graphics card, one notch at a time and keep testing overlay in Edius, if it comes good, then the driver is your problem

[bashvideo]

hi

I Tried the Quadro fx1400 Card on other system contain edius nx pci-e , and its work 100%

[antonsvideo]

in that case, the problem is the graphics card or the driver, try another (older) driver

or wait for Edius 4.5 on 8th August, it has all new overlay technology

[bashvideo]

hi to all ,

i Purchased edius hd card only ,,,

yes , every time i change the overlay setting , i close edius and open it again .

thanks for all

[antonsvideo]

i tryed all overlay option in edius setting

did you restart Edius after each overlay change? This is a MUST!

[shueardm]

I thought he was *confused*

[antonsvideo]

he is using a HD card not NX (not sure how he got the card because they only sell it as turnkey here)

the HD card should work fine in the 3rd slot from bottom up

[shueardm]

You can't use EDIUS Express with these Supermicro X7DAE(8 or 3) because there are not enough PCI-e slots. Grass Valley has screwed the guy who wants to use a proper motherboard like these. You would need to use EDIUS SP with PCI-X card.

[bashvideo]

if i use X7DA3 board , which slot can i put edius hd card , becuase its long card i think it will touch some thing on the board ?




my system now is 3,6 xeon e7525 chipset , is it compatible with X7DA3 board ? or should i change the prossesor also .


thanks for all .

[pjsssss]

We have the X7DA3 which works great

[antonsvideo]

The X7DAE works perfect here with 6 Sata ports and NX card

have not tried it with HD card