Post your EDIUS v4.5 questions here...

[antonsvideo]

any chance to request the waveform and vector displays to be green as is the world wide standard and as is in Edius 3?
http://www.videoproductions.com.au/h...ctorscope.html
http://www.videoproductions.com.au/h...equipment.html

[GrassValley_KH]

I has not been implemented, that I can recall - your original Feature Request forum post still stands.

[mike0130]

Are you planning to share a full downloadable file for 4.5(1) after Aug. 8? What I mean, I prefare if possible to use sigle installation instead of two installs- like 4.0+ update. Some companies (like ProDad e.t.c) provide an update with a full version, so you may chouse what to download.
Thank you
mike

[Geocities]

DVrex-RT

Clear system (winXP) just installed. DVrex-RT in it. Edius 4.5 - asks if I want to install drivers for it - i do. then all Edius installation then reboot, run Edius and then Edius don't have DVrex profile (preset) to chose only Generic output devices.
But drivers are installed perfectly after all - strange story...
any suggestions?

[THoff]

Clear system (winXP) just installed. DVrex-RT in it. Edius 4.5 - asks if I want to install drivers for it - i do. then all Edius installation then reboot, run Edius and then Edius don't have DVrex profile (preset) to chose only Generic output devices.
But drivers are installed perfectly after all - strange story...
any suggestions?

Yes. Don't use the V4.5 install from the Japanese site.

As was stated previously, it does not include hardware drivers. The V4.51 release that's coming on August 8th does include them.

[Rusty]

Nice idea

As was stated previously, it does not include hardware drivers. The V4.51 release that's coming on August 8th does include them.

I'd be very surprised (and pleased for others) if Rex were supported under 4.51. But I wouldn't get my hopes up yet.

Rusty

[GrassValley_KH]

Are you planning to share a full downloadable file for 4.5(1) after Aug. 8? What I mean, I prefare if possible to use sigle installation instead of two installs- like 4.0+ update. Some companies (like ProDad e.t.c) provide an update with a full version, so you may chouse what to download.
Thank you
mike

It has varied from build to build during the testing phase - the latest one, which I expect to be the final build for next week, is a full installer. That would also explain the large size (450MB). Of course, this may change.

In any event, you can always wait for the 4.5 trial version - that is essentially a full version that you simply use your own serial number with, and plug your dongle into.

Clear system (winXP) just installed. DVrex-RT in it. Edius 4.5 - asks if I want to install drivers for it - i do. then all Edius installation then reboot, run Edius and then Edius don't have DVrex profile (preset) to chose only Generic output devices.
But drivers are installed perfectly after all - strange story...
any suggestions?

To the best of my knowledge, no v4.xx distribution of EDIUS contained DVRex RT drivers, so telling EDIUS to install the 'Canopus DV Driver' will do nothing for you - you need to obtain the DVRex drivers separately.

Remember - DVRex is not officially supported under v4.xx, so if something doesn't work, there's nothing that can be, or will be done about it.

[Geocities]

To the best of my knowledge, no v4.xx distribution of EDIUS contained DVRex RT drivers, so telling EDIUS to install the 'Canopus DV Driver' will do nothing for you - you need to obtain the DVRex drivers separately.

I wouldn't probably asked if i wouldn't read "DVRex" on the right from 'Canopus DV Driver' during installation. I was surprised to see it there. And after - clearly - "DVrex-RT drivers" ets... So as far as Edius knows what its doing I decided to ask why it's not working after all. And also - Edius 4.5 installs!! drivers for DVrex (so it probably contains drivers inside maybe the wrong for DVrex but it has it) it just doesn't want to work with them. The same story with the native drivers for DVrex which are available from canopus site - Edius doesn't recognise them.
My question was only - will Edius 4.5(1) which knows what "DVrex" means work with DVrex or not... to spend my time on trying to make them friends or they know each other but will never work together... and really thanks for your answer I understand that DVrex is not supported by Canopus anymore.
Just to know if it will be possible with 4.51 at all or they are not compatible and that's it? For sure I will not ask any other qiuestions about DVrex+Edius 4.5(1) I need to know only if they can or can not work together.


Thanks in advance.

[Matt]

the unofficial 4.5 removed DVREX on my system.

Not sure what happened when I installed 4.5 from the japanese site. It did have DVrexRT under Canopus Drivers but after install, I only had an option for OHCI.

I too would like to know if it will work. My RexRT worked fine on 4.24

Seems like if it is on the list during install, it should load the appropriate driver.

Hopefully 4.51 will... I guess only time will tell

[GrassValley_KH]

To be honest, I don't know what the story is with (unofficial) support of DVRex in v4.5 - seeing that DVRex went off the radar with 4.00's launch, any use garnered out of the drivers has up till now, been on borrowed time.

If a driver installation of DVRex RT still sees EDIUS v4.5 failing to see it, then perhaps the long ride is finally at an end. Not bad for a hardware board that's almost ten years old.

[Mr Bill]

....you can always wait for the 4.5 trial version - that is essentially a full version that you simply use your own serial number with, and plug your dongle into.

Hi Mr Sparkle ,

This sounds like a good idea,
do you know when the trial will be ready for download ?

I am building a new system and would rather install a fresh full version of 4.5

Thanks :)

Mr Bill

[GrassValley_KH]

The trial should be launched at the same time as the update.

[pjsssss]

Also, I got an email from GV today that said the 4.5 download would be available August 7. (I hope this isn't news to you Kenneally...)

[GrassValley_KH]

If you read my annoucenment, it says August 8th 'Japan time' - this is the 7th in the US..

No surprises for me, thank goodness.

[Jason Ramsey]

Concerning doing a fresh install of the trial version...

No problem with p2 functionality if I were to do that, aye? Just plug in my dongle, and it still works like before? I just seem to remember something about p2 functionality changing a bit in future releases for new purchasers....

Thanks much,
Jason