Post your EDIUS v4.5 questions here...

[Alter Ego]

There are two bugs associated with QuickTime...

#1) Chrominance & Luminance is off when you import QT files (especially Apple DV footage)
#2) AR (Aspect Ratio) flag is not recognized in Edius...so if you import 16:9 files into Edius, and you have loads of them, you will have to individually right click and go into the properties of each clip and change it to 16:9.

Last time I checked, with 4.23, neither of these were fixed.

I need to check 4.24

Dave

Thanks for that info... I haven't tried 16:9 or apple DV yet. The 4:3 QT's that I imported were compressed with Radius SoftDV codec and they looked fine. Before 4.24, the Chrominance & Luminance was off with the same files. Now they look normal. I better try other QT's. Thanks StormDave.

[GrassValley_KH]

In short, yes, there'll always be a way to get EDIUS running with P2, without needing or buying hardware/turnkeys.

[Jason Ramsey]

Lol. I'm already too attached to another forum. Don't get me on some rss thingy :)

That's good to hear. But, just to clarify (if you are able at this point), this continued software based p2 support is not only for existing EDIUS users, right? Meaning some of these people who decide to make the jump with 4.5 or 5 will also have a software only option as well, right?

p.s. where do I find this rss subscription :) (EDIT: Found it...)
Thanks,
Jason

[GrassValley_KH]

Rest assured, P2 support isn't shifting to "Turnkey Only" overall, so you won't miss out. All that you need to know, is that the AVC-Intra plug-in will attract a separate charge.

There are some changes being worked out that may, or may not eventuate, regarding EDIUS Broadcast. The focus at the moment is to advertise it as a "turnkey only" product, but still offer a separate option pack for software-only, or NX/SP customers (in essence, the EDIUS Broadcast upgrade renamed).

There'll be more on that in a few months, and you guys will be the first to know. (I knew that RSS feature would come in handy)

[Jason Ramsey]

I understand that current broadcast users will still have the ability to edit p2/mxf natively. But, that asterisk is scaring the heck out of me. If version 5 comes along and we then need a turnkey solution to work with our p2 footy natively, I am going to absolutely lose it.

There are a lot of people who made the jump to EDIUS b/c it is the only NLE out there with proper and full support for the P2 workflow. And there are even more who are anxiously awaiting what 4.5 brings to possibly push them over the edge and make the jump to EDIUS as well. If we lose that, people will go mad. I shouldn't say if we lose it, but if we are then forced to buy a hardware add-on to be able to edit it.... That is a potentially very scary thing for me looking forward...

Jason

[antonsvideo]

How does the cursor behave when Alt N/Alt M is pressed ???
Jumps back to the cut as in 3.61 or stays "somewere in the field" as in 4.02 till now.

For me it is the worst BUG of Edius 4. PLEASE TRY TO EXPLAIN THEM TO FIX IT !!!

you can fix this yourself

1. go to application settings
2. go to playback settings
3. untick all except the top one (stop playback at frame drop)

[STORMDAVE]

The QT import bug is fixed! I just installed 4.24 and gave it a try. The imported QT files looked great. I imported a 19 GB QT file and it looked and played back perfect.....Thanks guys! This was the biggest showstopper for me. I work a lot with QT files. Boy did this one bring a smile back... Now I have to check the edl import to see if it is fixed.

There are two bugs associated with QuickTime...

#1) Chrominance & Luminance is off when you import QT files (especially Apple DV footage)
#2) AR (Aspect Ratio) flag is not recognized in Edius...so if you import 16:9 files into Edius, and you have loads of them, you will have to individually right click and go into the properties of each clip and change it to 16:9.

Last time I checked, with 4.23, neither of these were fixed.

I need to check 4.24

Dave

[Romigo]

How does the cursor behave when Alt N/Alt M is pressed ???
Jumps back to the cut as in 3.61 or stays "somewere in the field" as in 4.02 till now.

For me it is the worst BUG of Edius 4. PLEASE TRY TO EXPLAIN THEM TO FIX IT !!!

[Alter Ego]

The QT import bug is fixed! I just installed 4.24 and gave it a try. The imported QT files looked great. I imported a 19 GB QT file and it looked and played back perfect.....Thanks guys! This was the biggest showstopper for me. I work a lot with QT files. Boy did this one bring a smile back... Now I have to check the edl import to see if it is fixed.

[GrassValley_KH]

Exactly. Now with that said, I welcome more questions on this upcoming release!

[jonandmarkuk]

First off there is only a certain amount of information that can't be shared to keep the rival companies guessing.

Second, we are working on better communication with customers. What that will be we do not know at this time BUT, we are working on improving it.


Mike

I can see that being a fair comment. After all no company wants rivals to find out what is happening and get something out before the company who comes up with the idea. Even though we are all customers on here, nothing to stop someone else 'spying' and what we are doing. I would much sooner have limited information than loads of information and some of the promised features never appearing.

[GrassValley_BH]

You already testing ver.5.0 of Edius, so the time of 4.5 will come out it will be already not up- to- date, and you are still keeping silence about lot's of things.

You must know something about EDIUS that I don't (and that's definitely subject of a conspiracy theory for me) because I know absolutely nothing about a ver 5.0 at this point.

Funny you mention silence... I think we're between Microsoft and Apple. Microsoft way longer-term beta test cycles. Apple says nothing at all until launch day.

We want to be a part of community, not the outsiders as you keep us now...

If we wanted to keep you outsiders, we wouldn't have a forum.

[GrassValley_KH]

Will 4.5 have support of Canon's 30f frame rate mode?

I will double-check this, but I believe that it does.

[GrassValley_KH]

Well, let's see the release and then judge, nevertheless UNDO in the BIN window is a MUST-HAVE feature!

If you haven't already, make sure it's posted to the Feature Request forum!

[GrassValley_KH]

Export only, not import?

Sorry, should've said - both import and export are supported. You'll find the option in the same places as the EDL import and export.