NX card not working - Page 4

muleferg · 02-12-2009, 11:40 PM

Maybe he is holding the card upside down? :)
__________________

In the south we say "Bottom Side Up'rds"...

HeHaw
Mule
Edius 5.0 Broadcast NX

gatot · 02-13-2009, 06:29 AM

Sorry for long reply, here's the photo of NX card I have, its a combination of HX-E1 on top of HX-E2. Firewire/i400 connections are available on the top board (HX-E1) and on the back panel. I use the firewire on top board to connect it with NHX-B10 bay. Windows detect it as HX-E2 and drivers were successfully installed, but when I tested to run ADVC it gives me error message "cannot detect internal DV cable connection with the expansion board" but EDIUS is running OK, except I cannot have superfine project while still able to capture videos from a sony HD cam using the NHX-B10 bay.

View of card from top

Top board showing NHX-E1

Back side of the board

Back side of the board showing NHX-E2

shueardm · 02-13-2009, 06:37 AM

I am getting really lost regarding your actual question. It's been suggested you have no where to plug in the black cable that links the two cards. Your photos are not taken from the correct angle to shpow you the location. We need top shot from above the vertical axis.

tingsern · 02-13-2009, 06:37 AM

Gatot,

I am 100% certain you DO have the connections for the firewire and the optional component output card. It is on "TOP" of the card - you didn't photograph the top part - but - if you take a look at the card, you can see it.

Since you don't have the component output card - it is okay. You just need to connect the Firewire output from the card into an available Firewire port on your motherboard.

This means you have to use S-Video output to do your realtime monitoring.

shueardm · 02-13-2009, 06:53 AM

There's confusion here because of the labels. You have a HX-E2 card because it is a PCI-e board. However there's also a HX-E1 reference on the secondary (attached card) which is by the way not the expansion board. This has me dumbfounded, why is it labelled HX-E1. Perhaps that series didn't know if it was a boy or a girl.

tingsern · 02-13-2009, 06:56 AM

My eyes got crossed just now :-). I thought my spectacles was out of degrees. Maybe it is time we approach the parents of the card - and ask "What sex is this card?" ... hee hee !!!

gatot · 02-13-2009, 07:06 AM

Thank you ting and all of you who tried helping me out. I think I got myself confused with explanation on the manual telling me to connect NHX-E2 to expansion board which I don't have/doesn't come with the package.

But I still need explanation about the error above "cannot detect internal DV cable connections with the expansion board" when I run ADVC controller that makes me think the NX card is not working at the first place.

regards,
gatot

tingsern · 02-13-2009, 07:22 AM

What do you want to use that card for? I have never used the ADVC controller at all. Can you test if just that card alone can work with EDIUS?

Do you have an onboard Firewire 400 port? You have to connect the output Firewire port on that card to your motherboard - otherwise, you won't be able to use OHCI to acquire your video.

Unless you just want Canopus DV only - it is okay. But HDV requires OHCI to work.

SRsupport · 02-13-2009, 10:55 AM

Quote:

Originally Posted by gatot

But I still need explanation about the error above "cannot detect internal DV cable connections with the expansion board" when I run ADVC controller that makes me think the NX card is not working at the first place.

regards,
gatot

Don't worry about it I get the same message but everything works as far as I have been able to test.

gatot · 02-13-2009, 01:10 PM

Quote:

Originally Posted by tingsern

What do you want to use that card for? I have never used the ADVC controller at all. Can you test if just that card alone can work with EDIUS?

Do you have an onboard Firewire 400 port? You have to connect the output Firewire port on that card to your motherboard - otherwise, you won't be able to use OHCI to acquire your video.

Unless you just want Canopus DV only - it is okay. But HDV requires OHCI to work.

I just use it to capture video from a hd cam using inputs provided by NHX-B10
Edius is working fine except I seem unable to get superfine presets

Quote:

Originally Posted by SRsupport

Don't worry about it I get the same message but everything works as far as I have been able to test.

Just wondering why it keeps complaining while edius works fine

02-13-2009, 06:29 AM	#32
gatot Junior Member Join Date: Feb 2009 Location: Indonesia Posts: 10	view of my NHX-E1 and NHX-E2 card Sorry for long reply, here's the photo of NX card I have, its a combination of HX-E1 on top of HX-E2. Firewire/i400 connections are available on the top board (HX-E1) and on the back panel. I use the firewire on top board to connect it with NHX-B10 bay. Windows detect it as HX-E2 and drivers were successfully installed, but when I tested to run ADVC it gives me error message "cannot detect internal DV cable connection with the expansion board" but EDIUS is running OK, except I cannot have superfine project while still able to capture videos from a sony HD cam using the NHX-B10 bay. View of card from top Top board showing NHX-E1 Back side of the board Back side of the board showing NHX-E2 __________________ Intel Core2Duo E8400 on Asus P5Q PRO, 3x750 GB SATA, 3GB RAM, nVidia GeForce 8500GT, Edius 5 with NHX-E2 Hardware running inside Windows XP SP2 Last edited by gatot; 02-13-2009 at 06:42 AM.

02-13-2009, 06:37 AM	#33
shueardm Senior Member Join Date: May 2007 Location: South Australia Posts: 3,034	I am getting really lost regarding your actual question. It's been suggested you have no where to plug in the black cable that links the two cards. Your photos are not taken from the correct angle to shpow you the location. We need top shot from above the vertical axis. __________________ Supermicro X7DWA-N, 2 X Xeon 5420, Windows 8 Pro, 16GB RAM. GTX 280 O/C, Storm 3G EDIUS 6.52, BMD Broadcast Converter. http://on2dvd.com.au

02-13-2009, 06:37 AM	#34
tingsern Senior Member Join Date: May 2007 Location: Singapore Posts: 2,671	Gatot, I am 100% certain you DO have the connections for the firewire and the optional component output card. It is on "TOP" of the card - you didn't photograph the top part - but - if you take a look at the card, you can see it. Since you don't have the component output card - it is okay. You just need to connect the Firewire output from the card into an available Firewire port on your motherboard. This means you have to use S-Video output to do your realtime monitoring. __________________ TingSern ------------------------------ Edius NX (PCI-X) + Edius 5.5, Supermicro (X7DA8) Workstation (8 SCSI drives), 256GB Transcend SSD for System, 24GB RAM + dual Xeon quad core 3.16Ghz (5460) + Vista 64, nVidia Quadro 4000, Adaptec RAID 2230SLP, Viewsonic P225f & Dell U2410 displays. Panasonic HPX250 camera, BTLH1700W and BTLH80W broadcast monitor

02-13-2009, 06:53 AM	#35
shueardm Senior Member Join Date: May 2007 Location: South Australia Posts: 3,034	There's confusion here because of the labels. You have a HX-E2 card because it is a PCI-e board. However there's also a HX-E1 reference on the secondary (attached card) which is by the way not the expansion board. This has me dumbfounded, why is it labelled HX-E1. Perhaps that series didn't know if it was a boy or a girl. __________________ Supermicro X7DWA-N, 2 X Xeon 5420, Windows 8 Pro, 16GB RAM. GTX 280 O/C, Storm 3G EDIUS 6.52, BMD Broadcast Converter. http://on2dvd.com.au

02-13-2009, 06:56 AM	#36
tingsern Senior Member Join Date: May 2007 Location: Singapore Posts: 2,671	My eyes got crossed just now :-). I thought my spectacles was out of degrees. Maybe it is time we approach the parents of the card - and ask "What sex is this card?" ... hee hee !!! __________________ TingSern ------------------------------ Edius NX (PCI-X) + Edius 5.5, Supermicro (X7DA8) Workstation (8 SCSI drives), 256GB Transcend SSD for System, 24GB RAM + dual Xeon quad core 3.16Ghz (5460) + Vista 64, nVidia Quadro 4000, Adaptec RAID 2230SLP, Viewsonic P225f & Dell U2410 displays. Panasonic HPX250 camera, BTLH1700W and BTLH80W broadcast monitor

02-12-2009, 11:40 PM	#31
muleferg Senior Member Join Date: May 2007 Location: north wilkesboro, NC Posts: 249	Maybe he is holding the card upside down? :) __________________ In the south we say "Bottom Side Up'rds"... HeHaw Mule Edius 5.0 Broadcast NX

02-13-2009, 07:06 AM	#37
gatot Junior Member Join Date: Feb 2009 Location: Indonesia Posts: 10	Thank you ting and all of you who tried helping me out. I think I got myself confused with explanation on the manual telling me to connect NHX-E2 to expansion board which I don't have/doesn't come with the package. But I still need explanation about the error above "cannot detect internal DV cable connections with the expansion board" when I run ADVC controller that makes me think the NX card is not working at the first place. regards, gatot __________________ Intel Core2Duo E8400 on Asus P5Q PRO, 3x750 GB SATA, 3GB RAM, nVidia GeForce 8500GT, Edius 5 with NHX-E2 Hardware running inside Windows XP SP2

02-13-2009, 07:22 AM	#38
tingsern Senior Member Join Date: May 2007 Location: Singapore Posts: 2,671	What do you want to use that card for? I have never used the ADVC controller at all. Can you test if just that card alone can work with EDIUS? Do you have an onboard Firewire 400 port? You have to connect the output Firewire port on that card to your motherboard - otherwise, you won't be able to use OHCI to acquire your video. Unless you just want Canopus DV only - it is okay. But HDV requires OHCI to work. __________________ TingSern ------------------------------ Edius NX (PCI-X) + Edius 5.5, Supermicro (X7DA8) Workstation (8 SCSI drives), 256GB Transcend SSD for System, 24GB RAM + dual Xeon quad core 3.16Ghz (5460) + Vista 64, nVidia Quadro 4000, Adaptec RAID 2230SLP, Viewsonic P225f & Dell U2410 displays. Panasonic HPX250 camera, BTLH1700W and BTLH80W broadcast monitor

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
NX (PCI-X) card and HDThunder card	tingsern	Editing with EDIUS	20	01-22-2009 03:03 PM
No HD component preview on NX card	rolandds	Editing with EDIUS	5	11-07-2008 11:35 PM
Edius 5 and the NX card	robilonk	Editing with EDIUS	6	11-07-2008 07:14 PM
Question about NX Card	Philip	Editing with EDIUS	11	11-21-2007 12:09 AM
Audio from NX card question	Brookes	Editing with EDIUS	10	06-26-2007 10:13 PM